PDM and DDM false error

Share your FORScan experience with other users
Post Reply
Posts: 2
Joined: Thu Sep 13, 2018 1:03 pm
Vehicle: Ranger 3.2 XLT 2017

PDM and DDM false error

Post by fasot »

Ford Ranger XLT 3.2 4x4 AT 2018
Always fails at PDM (B12FF:15-0A) and DDM (B12FF:15-0A) doors light sensors, but they are perfectly working.
Do you have any possible answer ?
error 1.PNG
error 1.PNG (121.76 KiB) Viewed 677 times
The attachment error 1.PNG is no longer available
Posts: 1
Joined: Mon May 24, 2021 3:17 pm
Vehicle: Ford Ranger XLT DC puma 3.2 diesel 2017

Re: PDM and DDM false error

Post by Jorge2311 »

I'm having the same issue.
I can't find almost nothing about it, but I don't know how ended in this page

http://www.alldump.net/wp-content/uploa ... 2015526294

According to this, the problem seems to be a high current drawn on the power window. In my case, the problem started after I tinted the windows, so I think it's probably the motor of the power windows taking extra current
In my case, it's just the 2 windows where I noticed the glass to move slower than the others
Hope this helps you

Tengo el mismo probema.
Casi no pude encontrar nada pero no estoy muy seguro de como encontré la página que puse mas arriba
Aparentemente el problema sería el motor del levantavidrio consumiendo de mas. En mi caso aparecio después de polarizar las ventanillas por lo que puede ser el motor del levantavidrio consumiendo de mas.
Se da justo en las puertas que noto que sube lento.
Espero te sirva
Post Reply