AS Built format or not (F150)

Share your FORScan experience with other users
Post Reply
Emad
Posts: 1
Joined: Sat Oct 17, 2020 6:54 pm
Vehicle: F-150 2.7 FX4 2020

AS Built format or not (F150)

Post by Emad » Sun Oct 18, 2020 2:38 am

should we program and make changes to the (AS Built format) that shows up on each module or to the other module configuration questionnaire type.
and if we did modification on the not as built module configuration will it change the as built format?
if so should i save the as built first.

Thanks

boulderroller
Posts: 1
Joined: Thu Oct 01, 2020 1:44 pm
Vehicle: Ranger, gas, turbo 4 cyl, 2020

Re: AS Built format or not (F150)

Post by boulderroller » Sun Oct 18, 2020 8:59 pm

Yes, you should save the as-built file onto your computer before you make changes. Just in Case

tractmec
Posts: 172
Joined: Thu May 26, 2016 11:43 pm
Vehicle: F150 5.4 Triton 2005 Expe5.4 2003 Fusion 3.0 2010

Re: AS Built format or not (F150)

Post by tractmec » Wed Oct 21, 2020 2:34 am

Emad wrote:
Sun Oct 18, 2020 2:38 am
should we program and make changes to the (AS Built format) that shows up on each module or to the other module configuration questionnaire type.
and if we did modification on the not as built module configuration will it change the as built format?
if so should i save the as built first.

Thanks
If you see an entry in the module configuration section(non Asbuilt) that will make the change you wish to do then it is less dangerous to make the change there. It will also make the same change in the asbuilt configuration code section.

You can never go wrong saving a configuration before making a change!

Post Reply