Ford Ranger FX4 - Australia

Any issues related to FORScan application
Post Reply
FX004
Posts: 1
Joined: Sat Sep 29, 2018 7:17 am
Vehicle: FX4,diesel, 2017

Ford Ranger FX4 - Australia

Post by FX004 » Mon May 20, 2019 11:54 pm

Hello, Great forum and Lots of information. I was wondering if anyone has successfully got the inclinometer to work on the FX4 Australian 2017 model. I have the display added and the steering wheel position works but I can not get the roll and pitch to activate. I am using the IPC module 720-01-01 to get the display, but it will not activate the pitch and roll movement. Any help and or advice would be appreciated.
Graeme

martynm
Posts: 8
Joined: Thu Aug 09, 2018 2:29 pm
Vehicle: Everest 2.2 Diesel 2018

Re: Ford Ranger FX4 - Australia

Post by martynm » Sun Jun 02, 2019 5:40 am

If it is the same as the SA Rangers then there is no module/signal for roll and pitch, but if that option is enabled on the Ranger it also creates a permanent PCM error code that wont stay away until the IPC Offroad Gauge is disabled again.

saeb
Posts: 3
Joined: Mon Apr 18, 2016 11:52 pm
Vehicle: Ford ranger 2015 3.2

Re: Ford Ranger FX4 - Australia

Post by saeb » Sun Jun 02, 2019 5:50 am

You will find your answers over at my forum at http://www.saeb.net

Post Reply