Ford Everest/Endeavour Duratorq 2.2

Any issues related to FORScan application
Post Reply
Posts: 6
Joined: Wed Apr 17, 2019 9:05 am
Vehicle: Ford Everest Duratorq 2.2 2018

Ford Everest/Endeavour Duratorq 2.2

Post by j0sh4u319 » Thu Apr 18, 2019 12:10 pm

Hi guys, new here. I have been searching on the forums but can't seem to find a specific thread for this vehicle. Can anybody lead me to that topic/discussion if there is one?

Thank you.

Posts: 24
Joined: Thu Aug 09, 2018 2:29 pm
Vehicle: Everest 2.2 Diesel 2018

Re: Ford Everest/Endeavour Duratorq 2.2

Post by martynm » Sun Jun 02, 2019 7:17 am

There is no specific table as yet, but most of them can be taken from the F150 table. I have used several with success but occasionally the value needs to be slightly different to the F150 value. A lot of trial and error. Save your as built first, then change away, if it does not work, then revert to as built value.

Posts: 5
Joined: Fri May 19, 2017 9:12 am
Vehicle: ford everest 2.2
Location: thailand

Re: Ford Everest/Endeavour Duratorq 2.2

Post by bugzila » Wed Jun 05, 2019 6:34 am

Here is my spreadsheet for Everest/Ranger. :D ... sp=sharing

Posts: 5
Joined: Mon Aug 06, 2018 12:12 pm
Vehicle: Ford Endeavour 3.2 Titanium, 3198/200, 2017

Re: Ford Everest/Endeavour Duratorq 2.2

Post by krishsreedharan » Mon Jul 01, 2019 9:08 am

I have a question for you. To enable perpendicular park assist, do you have the 10 sensors or 12 sensors?

I did try to enable this in the past and I was able to select whether I wanted to parallel park or perpendicular park. However, after finding the space, it did nothing to perpendicular park.

Would much appreciate your experiences. Mine's an India spec Everest.

Post Reply