Focus 1.6Tdci -09 Regeneration problem

Any issues related to FORScan application
Post Reply
Posts: 1
Joined: Fri Apr 06, 2018 8:01 am
Vehicle: Ford focus 2

Focus 1.6Tdci -09 Regeneration problem

Post by rehtori74 » Tue Aug 28, 2018 7:44 am


I have problem with regeneration. Forscan shows fault P2458 and engine regeneration every 10-20km cycle.

Regeneration temperature is about 550-600c° highway speed(120kmh) and that takes time about 10min. dpf differential pressure sensor value is ~12Kpa (highway speed)

I trye stand still regeneration, but did not go through.

dpf filter has been changed to 15000km then.

Need help.


Posts: 2
Joined: Thu Aug 25, 2016 12:38 pm
Vehicle: Ford Cmax 1.6TDCI Titanium 2009

Re: Focus 1.6Tdci -09 Regeneration problem

Post by Smoelfespark » Fri Nov 23, 2018 1:41 pm

I have the same problem.
I have cleaned the DPF with JLM cleaning fluids. Replaced cracked DPF pressure hoses. Ordered a new pressure sensor.
The mileage is very bad, and the motoroil is being filled with diesel.
It all started with 3 bad injectors.
EGR is blocked.

Best regards

Post Reply