Page 5 of 5

Re: IPC Programming Not Working on 2019 Super Duty (Forscan 2.3.16 beta)

Posted: Tue Aug 13, 2019 2:51 am
by lynam05
I'll try it in the morning.. this has been driving me crazy past few days.. I'm hoping for the same issue.. easy fix

Re: IPC Programming Not Working on 2019 Super Duty (Forscan 2.3.16 beta)

Posted: Thu Aug 15, 2019 7:17 am
by Mine
I have this with my Ecosport, i can't switch any Number.
I would like DRL and Autolock on the Copickt menü. Evereytime it's come: contact the developer.

On my Mustang it's works.

Re: IPC Programming Not Working on 2019 Super Duty (Forscan 2.3.16 beta)

Posted: Sat Aug 17, 2019 2:30 pm
by lynam05
Has anyone had any progress yet?

We kindly ask everyone who experience this problem one newest models and latest version of FORScan send us debug information as described here:

https://forscan.org/contactus.html#debug_info

You will help to improve the project, and we will provide you with a test build that has the problem fixed.
[/quote]

Re: IPC Programming Not Working on 2019 Super Duty (Forscan 2.3.16 beta)

Posted: Mon Aug 26, 2019 3:19 pm
by fireice
One more vote for supporting writing to IPC for 2018 Navigator. Currently it does not work with the latest version of Forscan.

Thank you

Re: IPC Programming Not Working on 2019 Super Duty (Forscan 2.3.16 beta)

Posted: Sun Sep 15, 2019 5:08 pm
by bherron1
FORScan wrote:
Sat Sep 08, 2018 11:57 pm
FORScan recognizes modules by their part numbers, modules of new models usually have new part numbers that have to be added to the database periodically, what happens in new FORScan releases. Programming 2019 F-Series IPCs is supported in FORScan 2.3.17 (no public release yet, but everyone can request a test build from us in PM or by email).

However, what f-wolf and twisterrescue explained is actual for some brand new models of 2018 and 2019 model years, specifically:

2018 Expedition (U553)
2018 Navigator (U554)
2018 Ecosport (B515)
2018 Ka/Figo (B562)
2018 Ranger (P375)
2018 Everest (U375)
2019 Transit Connect (V408 MCA)
2019 Focus (C519)
(most likely, the list will grow)

In contrast to Ford IDS, FORScan will support these models (in fact, already does), but configuration and programming for some modules (first of all, for IPC) may not work. We are going, however, make these functions available in the future, although so far it is not clear how much time it will take.

We have sticked the thread as the information may be helpful for many users.
Oh boy I just changed values his morning in Fordscan on my 2019 F150 and not sure if I have the correct version of Fordscan as stated above 2.3.17

I noticed on the spread sheet for 2015 to 2019s it had old IPC new IPC and newer IPC I stopped the door ajar chime engine running and key in engine off, door chime and it worked, go figure. Should I continue or wait for the newer version. I used a ELS27 OBD connector with no HS, MS switch.

Re: IPC Programming Not Working on 2019 Super Duty (Forscan 2.3.16 beta)

Posted: Mon Sep 23, 2019 3:57 pm
by rstrainii
I cannot replicate the problem my 2019 sees all the modules.

Re: IPC Programming Not Working on 2019 Super Duty (Forscan 2.3.16 beta)

Posted: Tue Oct 01, 2019 7:56 am
by douge6666
very good