2016 Expedition backup camera calibration

Any issues related to FORScan application
Post Reply
radeckd
Posts: 3
Joined: Fri Feb 09, 2018 12:24 am
Vehicle: Ford Expedition, 3.5L EcoBoost, 2016

2016 Expedition backup camera calibration

Post by radeckd » Fri Feb 09, 2018 3:26 am

My backup camera was missing guidelines. I have a DTC code B115E. I ran "Local interconnectnetwork new module calibration". It was successful. Now I have lines but they won't turn when I turn the steering wheel. So it fixed the issue but only half way. Any ideas? I still get the same DTC code.

denbo
Posts: 172
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: 2016 Expedition backup camera calibration

Post by denbo » Fri Feb 09, 2018 7:22 pm

Loads and loads of this if you search. Is it genuine ford camera? If not your wasting your time.

radeckd
Posts: 3
Joined: Fri Feb 09, 2018 12:24 am
Vehicle: Ford Expedition, 3.5L EcoBoost, 2016

Re: 2016 Expedition backup camera calibration

Post by radeckd » Sat Feb 10, 2018 4:44 pm

It is original camera. I've seen people having issues with calibration not going through. Mine goes through and finishes with success and I did manage to have lines back but they wont react to turning the steering wheel. I haven't seen anyone with exact the same issue.

Post Reply