seems to hang waiting for a response

Any issues related to FORScan application
Blue Lightning
Posts: 2
Joined: Mon May 06, 2019 11:11 pm
Vehicle: 2018 F150 3.5 EB

Re: seems to hang waiting for a response

Post by Blue Lightning » Tue May 07, 2019 8:25 pm

I also have the exact same problem on a 2018 F150.
I am also getting "unable to read DTC" after every module as well.
It didn't happen the first time but every subsequent time it has. I don't want to make any more mods
just in case i brick a module and can't put it back.

thanks

Blue Lightning
Posts: 2
Joined: Mon May 06, 2019 11:11 pm
Vehicle: 2018 F150 3.5 EB

Re: seems to hang waiting for a response

Post by Blue Lightning » Tue May 07, 2019 10:58 pm

Blue Lightning wrote:
Tue May 07, 2019 8:25 pm
I also have the exact same problem on a 2018 F150.
I am also getting "unable to read DTC" after every module as well.
It didn't happen the first time but every subsequent time it has. I don't want to make any more mods
just in case i brick a module and can't put it back.

thanks
found a workaround, if you don't use a profile and re-load the modules every time it works just fine.

kturner01
Posts: 1
Joined: Sat May 04, 2019 7:22 pm
Vehicle: Ford F150, 3.5L, 2017

Re: seems to hang waiting for a response

Post by kturner01 » Thu May 09, 2019 12:53 am

My first experience with FORScan was to enable the Trailer Brake Controller and Trailer Brake Gain Control in a 2017 F150 earlier this evening. When "unable to read DTC" came up I came right back to this forum and found this workaround in 2 clicks. It worked perfect. Thank you so much for taking the time to share the workaround with us. I think my F150 is now ready to tow!!!

dbj888
Posts: 1
Joined: Wed Mar 01, 2017 1:57 am
Vehicle: mondeo2013

Re: seems to hang waiting for a response

Post by dbj888 » Mon Jun 03, 2019 5:46 pm


HTshow
Posts: 5
Joined: Tue May 09, 2017 1:44 am
Vehicle: 2015 350NM

Re: seems to hang waiting for a response

Post by HTshow » Sat Jul 20, 2019 3:00 am

I have the same problem..

Post Reply