DRL plus Parking Lights - Is this Possible?

Any issues related to FORScan application
Post Reply
mphoenix5
Posts: 5
Joined: Sun Aug 13, 2017 9:13 pm
Vehicle: 2016 Ford F150 ECO Boost V6

DRL plus Parking Lights - Is this Possible?

Post by mphoenix5 » Tue Aug 22, 2017 8:49 pm

I've been successful programming my 2016 F150 utilizing the spreadsheet provided (https://docs.google.com/document/d/1-8d ... obilebasic). Great tool!!

However, I'd like to have on the parking lights when the DRL are on. Is this possible?

The spreadsheet has the information below, but I don't understand what the result is when the module are changed as shown...??

Take the first line below: What is the result when these two codes (BCM 726-26-02, 726-50-01) are changed? When the DRL's are running the parking lights are now on?
And then the statement:.."must also set Daytime Lights on in IPC settings, adv settings, vehicle, lighting for all DRL choices here on spreadsheet." I'm not sure what that means?

I appreciate the help!

DRL - Parking Lights only (stock LEDs only) BCM 726-26-02 x1xx xxxx xxxx; 726-50-01 01xx ** must also set Daytime Lights on in IPC settings, adv settings, vehicle, lighting for all DRL choices here on spreadsheet**
DRL - Parking Lights & Low Beams only BCM 726-26-02 x1xx xxxx xxxx; 726-50-01 02xx
DRL - Parking Lights & Turns only BCM 726-45-01 xxxx 7Fxx xxxx; 726-26-02 x1xx xxxx xxxx; 726-50-01 08xx
DRL - Turns only (Halogen/aftermarket lights only) BCM 726-45-01 xxxx 7Fxx xxxx ** On stock LEDs this will also illuminate outer halo; 726-50-01 08xx
DRL - Front Fog Lights only BCM 726-45-01 xxxx 7Fxx xxxx To enable DRL Parking Lights with these set 726-26-02: x1xx xxxx xxxx also; 726-50-01 04xx
DRL - High beams only BCM 726-45-01 xxxx 7Fxx xxxx; 726-50-01 20xx

mphoenix5
Posts: 5
Joined: Sun Aug 13, 2017 9:13 pm
Vehicle: 2016 Ford F150 ECO Boost V6

Re: DRL plus Parking Lights - Is this Possible?

Post by mphoenix5 » Tue Aug 22, 2017 9:11 pm

After all that I think I found my answer...

726-26-02 x*xx xxxx xxxx DRL Include Park Lamps: 1=enable, 0=disable

mphoenix5
Posts: 5
Joined: Sun Aug 13, 2017 9:13 pm
Vehicle: 2016 Ford F150 ECO Boost V6

Re: DRL plus Parking Lights - Is this Possible?

Post by mphoenix5 » Sat Aug 26, 2017 12:29 pm

HELP!! Activated the above and now I have hyper flashing of the inside turn signal (though this is not reflected in the outside turn signals). I tried restoring my BCM backup but it said unable to load file.

Good grief, I don;t know what to do now. :shock:

icudruln
Posts: 2
Joined: Mon Aug 28, 2017 2:41 pm
Vehicle: ford f150 3.5l ecoboost, 2016

Re: DRL plus Parking Lights - Is this Possible?

Post by icudruln » Tue Aug 29, 2017 12:35 pm

i have the anzo switchbacks in my 16 Lariat (non-led), and i wanted only the parking lights on, so to achieve this i did the following:

726-26-02 x1xx xxxx xxxx
726-50-01 017F

Livnitup
Posts: 27
Joined: Wed May 18, 2016 10:13 pm
Vehicle: 2016 F-150 Platinum 3.5L EB

Re: DRL plus Parking Lights - Is this Possible?

Post by Livnitup » Thu Aug 31, 2017 8:20 pm

If you add aftermarket LEDs to a Halogen bucket and have hyperflash turn signals on the dash cluster, set this value below in BCM:
726-27-01 0000 xxxx xxxx

Post Reply