Functional of restore and write

Any issues related to FORScan application
Post Reply
DuyHuynh
Posts: 2
Joined: Thu Apr 28, 2016 2:16 am
Vehicle: Mazda,1.5/2016

Functional of restore and write

Post by DuyHuynh » Wed Jun 15, 2016 1:28 pm

Anybody could help me explain about the diference in some of module 731-01-01 and 731-01-03 as the attachment.

Why the module 731-01-03 have some function restore and write.

Thank you.
Last edited by DuyHuynh on Wed Jun 29, 2016 8:02 am, edited 1 time in total.

ClockWorK
Posts: 116
Joined: Sat Mar 05, 2016 11:29 pm
Vehicle: 2013 Taurus SHO pp
Location: Detroit Area
Contact:

Re: Functional of restore and write

Post by ClockWorK » Wed Jun 15, 2016 6:53 pm

I didn't write the software, but I assume 731-01-01, 731-01-02, and 731-01-03 are all part of one "block". The software reads / writes an entire block at a time.

When you click write or restore, it will apply to the entire block.
2013 Taurus SHO (pp), AWD Gauge Enabled, Engine Hours Enabled, Nav Enabled in APIM and IPC, DRLs Enabled
AsBuilt Compare Tool: http://www.compulsivecode.com/Project_A ... mpare.aspx

Violakbrowne
Posts: 4
Joined: Thu Jun 16, 2016 10:37 am
Vehicle: vehicle have high capacity engine

Re: Functional of restore and write

Post by Violakbrowne » Fri Jun 17, 2016 6:23 am

Sorry i don't get you what your really needed.Will you please clarify your questions and issues.Thank you so much for the post

DuyHuynh
Posts: 2
Joined: Thu Apr 28, 2016 2:16 am
Vehicle: Mazda,1.5/2016

Re: Functional of restore and write

Post by DuyHuynh » Fri Jun 17, 2016 8:57 am

Please advice me.
Thank you very much
Attachments
IMG_4902.JPG
IMG_4902.JPG (92.66 KiB) Viewed 3309 times
Last edited by DuyHuynh on Wed Jun 29, 2016 8:04 am, edited 2 times in total.

3GUCG
Posts: 6
Joined: Sat Aug 23, 2014 8:59 pm
Vehicle: mondeo 2.0 2001

Re: Functional of restore and write

Post by 3GUCG » Fri Jun 17, 2016 3:58 pm

In first hand take a look here http://forscan.org/forum/viewtopic.php?f=5&t=2012
In teory is very simple.
First numbers ex. 720 is the module address 01 01 is the memory address
The rest is module options coding except the last 2 numbers in every line of as-built. Those are the verifying checksum for that line of numbers.
Well the coding numbers, if you transform those numbers in binary form, results something like this " 0011 1100 1111 0000" etc.
Every number is a switch, 0 "off" - 1 "on" for an option in that module.
If you have a numerous sets of "as-built" data and the configuration of those cars you can discover what switch does what.

Post Reply