Forscan 2.3.48 - Focus mk2 1.6 TDCI 2008 - injector service procedure not showing injector order

Any issues related to FORScan application
Post Reply
ballwill
Posts: 1
Joined: Fri Aug 05, 2022 2:34 pm
Vehicle: FOCUS MK2 DV6 1.6 2008 TDCI 90BHP 66kW
Location: GB

Forscan 2.3.48 - Focus mk2 1.6 TDCI 2008 - injector service procedure not showing injector order

Post by ballwill »

Hi everyone,

at the moment I'm using Forscan 2.3.48 and when I try to write the injector codes the drawing of the injector number is not complete as shown below:
forscan.png
forscan.png (18.25 KiB) Viewed 618 times
Top view of forscan:
forscan2.png
forscan2.png (14.01 KiB) Viewed 618 times
I'm trying to figure out how to code them correctly in the ECU (this is a Right Hand Drive car but the engines abroad should be the same...): some people say the injector order is 4321, some 1342, some 1243, some 1234 :roll: ...Any idea? Is the image not showing the injector order normal? Thanks
FORScan
Site Admin
Posts: 2835
Joined: Fri Jun 13, 2014 2:21 am

Re: Forscan 2.3.48 - Focus mk2 1.6 TDCI 2008 - injector service procedure not showing injector order

Post by FORScan »

It means that injector codes are stored in cylinder order in this ECU.
Post Reply