Fiesta Mk7 Cruise Control Addon

Any issues related to FORScan application
Post Reply
tupps44
Posts: 1
Joined: Fri May 06, 2016 12:15 pm
Vehicle: Ford Fiesta 2012 1.6 Metal

Fiesta Mk7 Cruise Control Addon

Post by tupps44 » Fri May 06, 2016 7:33 pm

Hi,

I have a 2012 Mk7 fiesta, i have fitted the extra cruise control buttons and wiring to the steering wheel, now i need some help...

Connecting Forscan i can alter the module and enable cruise control but after writing it to the ecu i am still unable to use the cruise control, any ideas guys ?

thanks !

FORScan
Site Admin
Posts: 2619
Joined: Fri Jun 13, 2014 2:21 am

Re: Fiesta Mk7 Cruise Control Addon

Post by FORScan » Tue May 10, 2016 4:20 am

Did you read this article?

http://www.fordownersclub.com/forums/to ... termarket/

Otherwise, any DTCs detected after adding cruise control equipment and changing central config?

User avatar
satria_wr
Posts: 38
Joined: Sun Jun 28, 2015 5:13 pm
Vehicle: 2014 Ford Ecosport 1.5L Ti-VCT 110hp
Location: Jakarta, Indonesia

Re: Fiesta Mk7 Cruise Control Addon

Post by satria_wr » Mon May 16, 2016 3:29 am

Did you check the wiring from IPC to clock spring? Some fiesta didnt have that installed.
2014 Ford Ecosport Titanium
1.5 Ti-VCT Sigma (Remapped using PCMFlash)
PowerShift
2016 Mitsubishi Pajero Sport Limited
2.4 4N15 DiD (Remapped using New Genius)
8-A/T

and.short
Posts: 5
Joined: Tue May 17, 2016 8:41 am
Vehicle: Ford Fiesta 2015

Re: Fiesta Mk7 Cruise Control Addon

Post by and.short » Mon May 23, 2016 1:51 pm

Hello,

does anyone have experience with fitting cc on a 2015 (mk7.5) fiesta? I have ordered a steering wheel with cc buttons and I have enabled cc in central configuration with forscan. Do you believe this is enough? Does it matter that I have left the backup controller unprogrammed? (I do not have ms switch). Is it really this simple?

P.S. Any ideas what else I can play with? I have successfully enabled auto lock by speed and global opening closing.


Thanks

User avatar
satria_wr
Posts: 38
Joined: Sun Jun 28, 2015 5:13 pm
Vehicle: 2014 Ford Ecosport 1.5L Ti-VCT 110hp
Location: Jakarta, Indonesia

Re: Fiesta Mk7 Cruise Control Addon

Post by satria_wr » Thu Jun 02, 2016 2:08 am

and.short wrote:Hello,

does anyone have experience with fitting cc on a 2015 (mk7.5) fiesta? I have ordered a steering wheel with cc buttons and I have enabled cc in central configuration with forscan. Do you believe this is enough? Does it matter that I have left the backup controller unprogrammed? (I do not have ms switch). Is it really this simple?

P.S. Any ideas what else I can play with? I have successfully enabled auto lock by speed and global opening closing.


Thanks
Check the wiring from IPC to clockspring. If it was exist, then YES it was that simple :D
2014 Ford Ecosport Titanium
1.5 Ti-VCT Sigma (Remapped using PCMFlash)
PowerShift
2016 Mitsubishi Pajero Sport Limited
2.4 4N15 DiD (Remapped using New Genius)
8-A/T

toshibman
Posts: 4
Joined: Fri Jul 14, 2017 1:21 pm
Vehicle: Mondeo Vignale,2L, 2015

Re: Fiesta Mk7 Cruise Control Addon

Post by toshibman » Mon Dec 25, 2017 6:30 pm

Hi, i got now probably the same problem. Im trying to solve it. But try i on highway, be careful ! Press ON btn and then SPEED + and i will probably works with CC icon in cluster.
Mine works, but not showing up set value in LCD.

Post Reply