2013 Fusion DRL Disable Can't Write (interrupted?)

Any issues related to FORScan application
Post Reply
chadm424
Posts: 2
Joined: Wed May 04, 2016 8:51 pm
Vehicle: Fusion, DI 1.6l Turb, 2013

2013 Fusion DRL Disable Can't Write (interrupted?)

Post by chadm424 » Thu May 05, 2016 3:58 am

I was trying to disable my DRL which is just the low beam at less power. I have the extended license and I am able to get through to the point that I begin the write process but it fails at about 97% saying that it was interrupted and could not write the file. Any idea why its not working? I really want to disable these before I try to put HID's in. I am using a WiFi ELM 327 from ebay if that makes any difference.

FORScan
Site Admin
Posts: 2619
Joined: Fri Jun 13, 2014 2:21 am

Re: 2013 Fusion DRL Disable Can't Write (interrupted?)

Post by FORScan » Tue May 10, 2016 3:53 am

Please make sure you use latest version 2.3.1 (it contains significant fixes in AB procedure comparing with 2.3.0). If the problem is still there, please send us FORScan logs for investigations. Instruction is sent to PM.

DanMc85
Posts: 35
Joined: Sat Apr 02, 2016 6:51 pm
Vehicle: Fusion, 2.0L GTDI, 2014
Location: New England, USA
Contact:

Re: 2013 Fusion DRL Disable Can't Write (interrupted?)

Post by DanMc85 » Wed May 11, 2016 1:57 am

Hey if you go to BdyCM As Built. On your line 726-50-01.

Does it say 0280?

Try changing it to 017F if it does.

That turns the DRL on and off on my 2014.

FORScan
Site Admin
Posts: 2619
Joined: Fri Jun 13, 2014 2:21 am

Re: 2013 Fusion DRL Disable Can't Write (interrupted?)

Post by FORScan » Sat May 14, 2016 11:06 am

Resolved - fixed a bug with writing AB data on some models. v2.3.1 throws "Incompatible configuration" error even although the change is correct. Fixed, fix will be available in v2.3.2

Post Reply