Dpf regen

Any issues related to FORScan application
Post Reply
ievs76
Posts: 11
Joined: Sat Nov 16, 2019 12:27 pm
Vehicle: Ford Focus 2013, diesel, 1.6,105 bhp

Dpf regen

Post by ievs76 » Fri Nov 29, 2019 2:57 pm

Anyone know how I can monitor my mk3 focus to make sure passive regeneration is occurring?

I recently had fuel vaporizer replaced and forced regeneration. Before this i had codes associated with soot too high and vaporizer. I worried there was damage to the dpf or it is clogged. Basically I would like to know it is regenerating properly again?

User avatar
fordsmax471
Posts: 323
Joined: Mon Aug 07, 2017 5:29 pm
Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift

Re: Dpf regen

Post by fordsmax471 » Fri Nov 29, 2019 4:02 pm

Windows 10 & ELS27 v4

Donny
Posts: 33
Joined: Sun May 08, 2016 9:00 pm
Vehicle: Focus 1.6 Tdci 201071QP67

Re: Dpf regen

Post by Donny » Fri Nov 29, 2019 10:02 pm

There should also be a PID for Particulate Filter Temperature. On my MK2.5 is called PPFT.

During regeneration on my car it went up very quickly from it's normal temperature to 500 to 600 C.

ievs76
Posts: 11
Joined: Sat Nov 16, 2019 12:27 pm
Vehicle: Ford Focus 2013, diesel, 1.6,105 bhp

Re: Dpf regen

Post by ievs76 » Thu Dec 05, 2019 12:35 am

The last time I checked the available pids, there was only differential pressure pids.

Post Reply