ABS module missing.

Any issues related to FORScan application
Post Reply
capri v8 driver
Posts: 5
Joined: Wed May 09, 2018 2:11 pm
Vehicle: jaguar s type 3.0 v6 2000

ABS module missing.

Post by capri v8 driver » Mon Sep 30, 2019 6:55 pm

Hello everyone.

Maybe someone can point me in the right direction.

Car: jaguar s type 3.0 v6 '99.

While driving the speedo stopped working and the ABS and traction control light came on. When using forscan (using a '99 Lincoln ls 3.0 profile) I got the code U1041 Vehicle speed SCP message invalid on the BMP, DDCM and SLCM modules but the ABS module is not showing up.

I checked the wiring, feeds and earths and the SCP lines. Those where good. I then replaced all the wheel sensors. This sorted the traction control light and as last I replaced the ABS module. After I replaced the ABS module the door locks lock when you start driving and the gearbox also shifts. I did a diagnostics again and the U1041 code is not showing up again. However, the speedo still does not work. Sometimes you see a slight movement of the needle but that's it. The ABS is still not showing up in the module list when using FORScan.

If some has a idea where to look next lets hear it.

Thanks.

Post Reply