checking injectors

Any issues related to FORScan application
Post Reply
stevejackson
Posts: 8
Joined: Thu Sep 19, 2019 10:08 am
Vehicle: ford c-max mk2 2010 1.6 tdci 85w 115 hp

checking injectors

Post by stevejackson » Mon Sep 30, 2019 9:55 am

Morning all I have just completed changing an injector on my c-max mk11 and have recoded ok, car started ok and ticks over fine,but when I apply revs and hold there is just a mild shudder at about 2000 revs.My question is is there a injector test I can run on my car using FORscan any help will be appreciated and thanks in advance.

denbo
Posts: 627
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: checking injectors

Post by denbo » Mon Sep 30, 2019 5:31 pm

Was the injector new,refurbished, used ?

stevejackson
Posts: 8
Joined: Thu Sep 19, 2019 10:08 am
Vehicle: ford c-max mk2 2010 1.6 tdci 85w 115 hp

Re: checking injectors

Post by stevejackson » Tue Oct 01, 2019 5:55 am

Hi it was used and did improve things in that the tickover was much better but when pressing the accelerator it goes back to being lumpy and doesn't move the revs up,still seems to me that it is misfiring but there is no fault code at all,thanks.

Post Reply