Wonder if someone can help I have the fault code P244D - Exhaust Temp Too High For Particulate Filter Regeneration Bank 1 on my 2016 mondeo Mk5 Bi-Turbo.
The car just cut out - no warning- and would not restart.
After appx 45 minutes I was able to start and get home in limp mode.
No other codes are showing using forscan. I had the same or similar fault on the car appx 2 years ago and the ford dealer replaced the EGT sensor under warranty to resolve the problem.....
I was trying to see if I could clear the fault code by resetting the learnt EGT sensor values and monitor the sensor outputs but cannot see a function on Forscan for the mondeo Mk5 (2.0 Bi-Turbo) to reset the values.
I note you can reset the PCM module but as I am not 100% sure what that actually resets so did not try that option
Can anyone give some advice on how to reset the exhaust gas temp sensor learnt values.
Any issues related to FORScan application
1 post • Page 1 of 1