Page 1 of 1

Using Forscan Lite to perform Regen on 2010 Mondeo

Posted: Thu Jun 27, 2019 2:05 am
by stub80
Hi All

I'm trying to use Forscan lite on an IOS device to perform a DPF static regen on a 2010 Mondeo TDCI

It starts the process but then straight away says service procedure has been interrupted contact developer.

I'm using one of the Chinese ELM327 WIFI Adaptors which shows a speed of 62ms (I've tried to logon to the adaptor and change the settings as per this link viewtopic.php?f=4&t=16 but have had to luck so far)

I'm doing all this from my phone as I don't have access to a laptop at the moment.

Should you be able to perform a DPF Regen from the Forscan Lite App? If yes could the issue be that the speed is too low from the ELM to perform it

Or does it have to be done from the PC Software?

Cheers

Re: Using Forscan Lite to perform Regen on 2010 Mondeo

Posted: Thu Jun 27, 2019 7:35 am
by denbo
I really do believe it has to be by pc, and not wifi.