Programowanie akumulatora
Programowanie akumulatora
Witam, jak krok po kroku zaprogramować w forscan nowy akumulator? Ford s max 2015r 2.0 tdci
Re: Programowanie akumulatora
English my friend if you want help. Use translate
Re: Programowanie akumulatora
Hello, how to change a new battery step by step in forscan? Ford s max 2015 2.0 TDCI
Re: Programowanie akumulatora
I can't help, but I'd like you to write or reference why new battery needs to be reported to car?
In my older Focus 2007, I just changed it.
In my older Focus 2007, I just changed it.
Re: Programowanie akumulatora
Battery management. Read up on it.
Re: Programowanie akumulatora
I am looking for battery management and I can't find anything, maybe because I'm looking in Polish and that's why I can't find anything, can someone send a link?
From what I know, I need to reset something and enter new parameters, but I don't know where and what to do in Fortscan. As if someone wrote what to do in turn as I insert a new battery.
Now when I check the battery status it shows 3%, after connecting the rectifier overnight it reaches 70% but after 1 day it again drops to 3-5%. I still have a question, why doesn't it show that I have a low battery on the display? I don't have any low battery message.
From what I know, I need to reset something and enter new parameters, but I don't know where and what to do in Fortscan. As if someone wrote what to do in turn as I insert a new battery.
Now when I check the battery status it shows 3%, after connecting the rectifier overnight it reaches 70% but after 1 day it again drops to 3-5%. I still have a question, why doesn't it show that I have a low battery on the display? I don't have any low battery message.
Re: Programowanie akumulatora
I dont think the 3% is battery but is showing charge rate. Car needs to know what type and amperage of new battery so it can moniter it.
Re: Programowanie akumulatora
As I enter forscan I can see what battery and what capacity, I think battery monitoring can be turned off. If it is possible? If so how can I change?
-
- Posts: 3
- Joined: Mon Aug 12, 2019 3:32 pm
- Vehicle: Transit 2.2 2010
Re: Programowanie akumulatora
If you replace the battery with the same capacity then there is no real need to tell the car. The car will work out current and voltage all by itself in time.
Doing with the scan tool just resets all the values NOW. Not telling the car just means it may take a few minutes while the engine runs. It does it quick.
Doing with the scan tool just resets all the values NOW. Not telling the car just means it may take a few minutes while the engine runs. It does it quick.
Re: Programowanie akumulatora
From what you write, I do nothing in forscan after inserting a new battery? I wonder why it doesn't show a low charge, after the engine is off I can listen to music until the battery is completely discharged and nothing will show