Not seeing all the modules

Discussion about adapters and connections - usage, problems, solutions
Post Reply
Posts: 3
Joined: Fri Feb 08, 2019 10:21 pm
Vehicle: Ford 2015 F150

Not seeing all the modules

Post by timg » Wed Feb 13, 2019 5:35 pm

I have a elmconfig adapter with hs ms switch when I connect to 2015 f150 xl I am not seeing Ipc module Has anyone had this problem

Posts: 24
Joined: Sun Sep 23, 2018 1:51 pm
Vehicle: Ford Focus MK4 - EcoBlue 1.5

Re: Not seeing all the modules

Post by Focus-MK4 » Wed Feb 20, 2019 3:48 pm

When during the connection all other modules are visible (some on HS possition, some on MS possition) and IPC is not showing up then it could be:
a) the module on your vehicle is not supported
b) the module is not responding - a reset is necessary (plug off the battery for some time (5 min.))
c) the adapter is somehow faulty (very low chance on that when other modules can be seen - but just wanted to mention it)

User avatar
Posts: 415
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: Not seeing all the modules

Post by Andyfocus » Wed Feb 20, 2019 8:54 pm

make sure in options you have specified that the elm has a switch and to ask to switch .
i am the same as you just a forscan user still learning .

Post Reply