Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Discussion about adapters and connections - usage, problems, solutions
carguy24
Posts: 4
Joined: Mon May 23, 2016 10:56 am
Vehicle: mercury mariner 2007

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by carguy24 » Mon May 23, 2016 1:46 pm

I used forscan just fine with cardaq-m

carguy24
Posts: 4
Joined: Mon May 23, 2016 10:56 am
Vehicle: mercury mariner 2007

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by carguy24 » Mon May 23, 2016 2:14 pm

I was successful using cardaq-m with Windows 7 version of forscan...I don't have the extended license yet so I havnt tries the programming..but diagnostics worked well with my interface

DanMc85
Posts: 35
Joined: Sat Apr 02, 2016 6:51 pm
Vehicle: Fusion, 2.0L GTDI, 2014
Location: New England, USA
Contact:

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by DanMc85 » Tue Jun 28, 2016 12:21 pm

FORScan wrote: May be someone will create a dedicated drivers package for VCM2 some day.
Here is the Bosch VCI Manager 2.3.85.7 dedicated driver and firmware update package for the Ford VCM II... it has been available for a while now. At least a year, but just saw this post lol
http://www.boschdiagnostics.com/pro/sit ... 3.85.7.exe

Allows the VCM II to be used with J2534 applications without installing full blown IDS software.

Source: http://www.boschdiagnostics.com/pro/sof ... ord-vcm-ii

Note: Some older china clones will not work with this version unless they support IDS 97+, if not then an older driver package is needed.
Older versions, such as 2.1.119.3 (IDS 91-95/96) OR 2.1.1.5 (IDS 86)

chachawas
Posts: 1
Joined: Sat Jun 25, 2016 3:24 pm
Vehicle: mazda2 1.5 skyactiv=d

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by chachawas » Sun Aug 07, 2016 5:29 am

Hello I have tactrix openport 2.0. I fail to use with forscan 2.3.2. Can anyone guide me ? :roll:

autotrans
Posts: 11
Joined: Sun Sep 18, 2016 6:49 am
Vehicle: HONDA VTEC 1600 2003

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by autotrans » Thu Sep 22, 2016 7:02 am

Looked at august 2016 transit last week, tried ids no joy ( to be fair the ids has not been updated for a while ) then
tried forscan with a drewtec JLR mongoose and had access to a cardaq plus, both worked fine with MS and HS can.
have also used JLR mongoose on a 1999 focus and a 2002 mondeo. I believe the focus still had some old iso modules
so it seems iso \ 1850 pwm \ ms can \ hs can are all working .

Ecmbuster
Posts: 7
Joined: Sun Mar 15, 2015 4:08 am
Vehicle: A6 Audi 2.8L Quattro

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Ecmbuster » Tue Oct 04, 2016 5:17 am

Here are a few images with a 2007 Ford Focus North American Version with the Actia PassThru-XS.
Good success and quick to diagnose. The software was stable and connected quickly.
Attachments
AnyC00006.GIF
AnyC00006.GIF (22.73 KiB) Viewed 16612 times
AnyC00005.GIF
AnyC00005.GIF (28.87 KiB) Viewed 16612 times
AnyC00004.GIF
AnyC00004.GIF (33.34 KiB) Viewed 16612 times

autotrans
Posts: 11
Joined: Sun Sep 18, 2016 6:49 am
Vehicle: HONDA VTEC 1600 2003

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by autotrans » Fri Oct 28, 2016 7:51 am

Image of 2007 fiesta, exactly the same with cardaq or jaguar\landrover mongoose
and much faster than elm327
Attachments
festa1.jpg
festa1.jpg (77.49 KiB) Viewed 16349 times

Takeshi
Posts: 2
Joined: Sat Oct 29, 2016 3:51 pm
Vehicle: Mazda/Skyactiv

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Takeshi » Wed Nov 02, 2016 6:45 am

Image

Hi Sid here from Malaysia, connected using Pass-Thru J2534 OP 2.0
response time is faster than ELM327
Really appreciated if developer can update beta test using module as I'm also using OP 2.0 for Toyota and others.
I think OP 2.0 is more stable.
I also have Actia XS IDS and ELM327
Please count me in for beta testing.Thanks Admin!
Attachments
forscan OP2.0.jpg
forscan OP2.0.jpg (455.86 KiB) Viewed 16255 times

Takeshi
Posts: 2
Joined: Sat Oct 29, 2016 3:51 pm
Vehicle: Mazda/Skyactiv

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Takeshi » Wed Nov 02, 2016 6:47 am

chachawas wrote:Hello I have tactrix openport 2.0. I fail to use with forscan 2.3.2. Can anyone guide me ? :roll:
Use latest revision.I mange to connect using OP 2.0.

Ashraf6119
Posts: 8
Joined: Thu Nov 10, 2016 12:08 am
Vehicle: Ford Transit 2.4lt 2008 Diesel

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Ashraf6119 » Fri Nov 11, 2016 8:46 pm

Had a quick play with ForScan software 2.3.4 version on a Ford Galaxy 2009 using Original AVDI PassThru interface and it did communicate with all the modules........will test it later for more functions and report the out come..............

Post Reply