Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Discussion about adapters and connections - usage, problems, solutions
devele
Posts: 4
Joined: Sat Oct 28, 2017 12:53 pm
Vehicle: Ford Fiesta 1.4 TDCI

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by devele »

No. I don't have it,... I bought JDiag Elite-II as a little cheap and reliable, anybody who use this device please share their experience to me
thanks in advance.
devele
Posts: 4
Joined: Sat Oct 28, 2017 12:53 pm
Vehicle: Ford Fiesta 1.4 TDCI

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by devele »

Even I tried on VINT the same thing happens, I tried it on FORD Fiesta 2010 model with Siemens ECU the programming and service procedure is not available, what could be the problem
Norbi_wo
Posts: 2
Joined: Wed Jan 29, 2020 3:19 pm
Vehicle: Ford Fusion 2.0 Ecoboost 240KM, 2014

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Norbi_wo »

Hello.
Today I used klon mongoose jlr plus (SP-205c with orginal driver for windows 7 64 bit) with forscan 2.3.29 beta. I conected with ford focus St mk4 it's perfectly worked.
Ecmbuster
Posts: 964
Joined: Sun Mar 15, 2015 4:08 am
Vehicle: Volvo Bertone and two Motorcyles
Location: On a spinning rock

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Ecmbuster »

There is another adapter used with FORScan. The original VCM I was tested and passed similar to:
CarDAQ Plus
CarDAQ Plus 2
Attachments
1st test
1st test
Test 01.JPG (230.82 KiB) Viewed 4023 times
3rd test
3rd test
Test 03.JPG (110.48 KiB) Viewed 4024 times
2nd test
2nd test
Test 02.JPG (133.28 KiB) Viewed 4024 times
VCM 1 Connection
VCM 1 Connection
VCM 1.jpg (192.07 KiB) Viewed 4024 times
1st test
1st test
Test 01.JPG (230.82 KiB) Viewed 4024 times
3rd test
3rd test
Test 03.JPG (110.48 KiB) Viewed 4024 times
2nd test
2nd test
Test 02.JPG (133.28 KiB) Viewed 4024 times
Do not ask for help in PM. Use the forum to ask and answer questions!
ahmadtow
Posts: 1
Joined: Tue Mar 31, 2020 3:30 pm
Vehicle: MONDEO IV,2.0 TDCI 2.0,140h,2008

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by ahmadtow »

devele wrote:
Thu Feb 06, 2020 4:33 am
No. I don't have it,... I bought JDiag Elite-II as a little cheap and reliable, anybody who use this device please share their experience to me
thanks in advance.
I have JDiag elite pro II test it with Xentry and DAs and VIDA and Forscan all good will test it more when i have time
Daone2021
Posts: 22
Joined: Sun Apr 19, 2020 8:36 pm
Vehicle: 2006 Ford Explorer 4.0L

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Daone2021 »

I have a Cardaq plus 1 and 2 along with original VCM II. Which one will work best with this program. Also, does this do flashing like IDS and FJDS? Or is flashing/programming only done through Ford? Thank you! New here. :)
aircraftru
Posts: 4
Joined: Mon May 04, 2020 12:13 pm
Vehicle: Insignia, A20DTE, 2000cc/96kW, 2014

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by aircraftru »

Did someone is run MDI interface? Is work with GDS, but can’t figure way to run with ForSCAN
Keithmac
Posts: 161
Joined: Fri Nov 23, 2018 6:51 pm
Vehicle: MK2 Kuga 2l dcti 163 Powershift 2013.

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by Keithmac »

I've been using a 2 board clone VCM2 with our 2013 Kuga.

Has worked flawlessly with FORScan, did a Powershift TCU furmware update in less than 5 minutes without issue.

Wasn't the cheapest available, sourced from Germany but works a treat.
light
Posts: 1
Joined: Thu Sep 05, 2019 12:29 pm
Vehicle: FORD focus

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by light »

CantieCAR Ford mondeo body module programming "CAN bus compatibility problem"
any solution ??
Attachments
error.jpg
error.jpg (156.02 KiB) Viewed 3275 times
raftrading
Posts: 2
Joined: Wed Aug 05, 2020 3:39 pm
Vehicle: transit 2200 tdci 2007

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

Post by raftrading »

Has anyone tried a autel maxiflash j2534? I can't get forscan to find mine?
Post Reply