2014 F150 STX remote start menu IPC voltage too low

Discussion about adapters and connections - usage, problems, solutions
Post Reply
eljermc
Posts: 2
Joined: Wed Oct 24, 2018 3:49 pm
Vehicle: F150, 5.0, 2014

2014 F150 STX remote start menu IPC voltage too low

Post by eljermc » Sat Feb 16, 2019 3:31 am

I got the remote start enabled through the BdyCM no problem at all. I'm trying to get the menu in the instrument panel. When I try to configure the IPC I get a voltage too low error. I connected a battery charger over night and left the charger on while running FORScan and still no luck. Could it possibly be an issue with my BAFX bluetooth adapter (without the HS/MS switch) Also wondering if anyone has any advice on the values to change for the menu to show up in the dash (720-01-02). I have read to change the middle two digits to either F0, F2 or FE which is correct for a 2014 F150 STX? I also saw a couple custom ones on the spread sheet that mention the STX anyone know what is special about those?

2B-4G10
Posts: 4
Joined: Mon Aug 26, 2019 5:02 pm
Vehicle: F150, Gas, 5.0, 395HP, 2018

Re: 2014 F150 STX remote start menu IPC voltage too low

Post by 2B-4G10 » Mon Oct 28, 2019 10:47 am

So Sorry to hear about that and wish someone with expertise would kick-in on these questions.

best of wishes

Post Reply