Best J2534 passthrough for SAEJ1850PWM

Discussion about adapters and connections - usage, problems, solutions
Post Reply
Posts: 3
Joined: Wed Jan 31, 2018 12:15 am
Vehicle: 99 Mazda B2500 w/ 2.5L 99 Ranger Engine swap 255hp

Best J2534 passthrough for SAEJ1850PWM

Post by Bonexsam » Wed Jan 31, 2018 6:36 am

Been wracking my brain on this one for waaay too long now...

Looking to purchase a J2534 pass-through interface that is compatible with FORScan to edit ECU parameters that will work with my protocol SAEJ1850PWM (for 99 Ford Rangers)

Trying to stay under $200, so far all I have come across is the following.... ... 0.0.Qekxgn ... 542.cTsmme

This is slowly killing me, any help is appreciated....

Posts: 13
Joined: Sun Jan 29, 2017 2:36 pm
Vehicle: transit diesil 85ps 2010

Re: Best J2534 passthrough for SAEJ1850PWM

Post by davyt » Wed Jan 31, 2018 5:49 pm

Vcm11 but make sure it's a "sp177-c1" there are many that look like it and make claims as to suitability but only have 1 circuit board. Inside the proper 1 has 2 boards it will read dtc's but wont do programming properly as half the bloody thing is not there!

Post Reply