Attention - bad clone of ELS27

Discussion about adapters and connections - usage, problems, solutions
smegun
Posts: 14
Joined: Tue Dec 04, 2018 2:43 am
Vehicle: 2002 lincoln ls sport 3.9

Re: Attention - bad clone of ELS27

Post by smegun » Sat Dec 28, 2019 2:43 pm

SoNic67 wrote:
Sun Feb 26, 2017 4:02 pm
Well, since the price was 1/2 of the "official" ELS27, I have tried my luck:
https://www.aliexpress.com/item/2016-Ne ... 91112.html
Results on my 2001 Ford Explorer and 2001 Mercury Sable are as attached:

Error.png
same for me cannot connect to 2002 Lincoln as above stnfirmwareupdater cannot upgrade the stn1170

benlatak
Posts: 5
Joined: Thu Dec 31, 2015 7:21 am
Vehicle: FORD Fiesta ST182

Re: Attention - bad clone of ELS27

Post by benlatak » Fri Jan 31, 2020 5:45 am

Hello. I live in France ans search this ELS27 adapter.

Here on Ebay, that seems it is official dealer.. True ??? => https://www.ebay.co.uk/itm/ELS27-v4-Dia ... 3278168879

Image

JR_Clio
Posts: 1
Joined: Sat May 02, 2020 7:09 pm
Vehicle: Ford Focus mk2 2.0 tdci/ Mitsubishi Galant 2.0 98

Re: Attention - bad clone of ELS27

Post by JR_Clio » Thu Jun 18, 2020 7:21 pm

Hello everyone. Recently Internacional bought an Aliexpress ELS27

Just could operate onda HS-CAN mode, and I'm thinking itinerario could be not really what they say
Is this one: https://m.es.aliexpress.com/item/329210 ... 495&is_c=N

Image

Dos you think this is a fake one?

AndyGeorge
Posts: 3
Joined: Sat Jul 18, 2020 7:52 am
Vehicle: 2006 Mazda 3 BK Series 2, 2.3L SP23, AT

A good ELS27 Clone

Post by AndyGeorge » Mon Jul 27, 2020 12:32 pm

$30 ELS27 clone connected 2006 Mazda 3 very well. Locally shipped in Melbourne Australia. Can only comment on that particular use case.

All modules on HS-CAN and MS-CAN appeared on connect. Connected at high speed and low latency. Using Forscan for Windows, USB adapter.

Think its using
1. FTDI FT32RL UART to USB
2. STN1170 v3.3.1 (ELM327 v1.3a)

<<<config log>>>
Interface:
Port: COM5, 2000000 kbps
Type: FTDI
Adapter: STN1170 v3.3.1 (ELM327 v1.3a)
Min.delay: 12 ms ( Good)
Errors: None

Vehicle:
Model: Mazda Axela/Mazda3 (Japan/General market)
Engine: L3
Capacity: 2.3L
Generation: 2006 MY
Transmission gear: Automatic
VIN: JM0BK1032***

TCM - Transmission Control Module
Strategy : SW-L34NTA000

PCM - Powertrain Control Module
Part number: L34NA
Strategy : SW-L34NEA000
Hardware type: NGS_PCM
VIN: JM0BK1032***

OBDII - On Board Diagnostic II

ABS - Antilock braking system
Part number: 6N61-2C405-AA
Software version: v4 2005-11-07

EPS - Electronic-Controlled Power Steering
Part number: AC
Software version: v6 2005-11-14

IC - Instrument Cluster
Software version: 2005-12-16

RCM - Restraint Control Module
Part number: BS4H-57K300-
Software version: 2006-02-27

EATC - Electronic Automatic Temperature Control

GEM - Generic Electronic Module
Software version: v3 2006-03-21
Attachments
double sided - s-l1600.jpg
double sided - s-l1600.jpg (148.53 KiB) Viewed 1467 times
Chips - s-l1600.jpg
Chips - s-l1600.jpg (159.19 KiB) Viewed 1467 times
Cable - s-l1600.jpg
Cable - s-l1600.jpg (127.28 KiB) Viewed 1467 times

identificator
Posts: 1
Joined: Sun Sep 13, 2020 8:12 am
Vehicle: Kuga 1.6 182л.с.

Re: Attention - bad clone of ELS27

Post by identificator » Fri Oct 09, 2020 8:04 pm

AndyGeorge wrote:
Mon Jul 27, 2020 12:32 pm
All modules on HS-CAN and MS-CAN appeared on connect. Connected at high speed and low latency. Using Forscan for Windows, USB adapter.
Equal to previous one, it's a GOOD clone (outfit is equal):

Microchip
PIC24
HJ128GP
504-I/PT(88)
1642VWV

FTDI
1703-c
D9263701
FT232RL

Mondeo 2007 was read and performed "error clean-up"
Kuga 2014 was read and Cruise-Control was configured.

Post Reply