Page 5 of 16

Re: Where to buy a compatible adapter?

Posted: Tue Dec 06, 2016 8:53 am
by janekj1985
What do You think about interface for toyota & lexus mini-vci? It have j2534 and is compatibile with SAE J1850 PWM. I want use it for Mondeo mk3 '02 tddi. I have elm327 with bluetooth connection but I cant programm pcm. Is this possible that my elm is not compatibile with j2534?

Re: Where to buy a compatible adapter?

Posted: Tue Dec 06, 2016 10:40 am
by azip01
janekj1985 wrote:What do You think about interface for toyota & lexus mini-vci? It have j2534 and is compatibile with SAE J1850 PWM. I want use it for Mondeo mk3 '02 tddi. I have elm327 with bluetooth connection but I cant programm pcm. Is this possible that my elm is not compatibile with j2534?
I have Toyota mini-VCI but I can not use it with Forscan.( I use Xhorse driver, Windows 10 32bit on VM VirtualBox.) If anyone can use this with Forscan, please tell us in this topic.

Re: Where to buy a compatible adapter?

Posted: Tue Dec 06, 2016 11:25 am
by janekj1985
It would be cheapiest option for programming pcm if it work correctly :) Can You try to connect it?

Re: Where to buy a compatible adapter?

Posted: Mon Dec 26, 2016 5:33 pm
by edc
Would this one be a good one for Ford?

http://www.ebay.com/itm/Ford-USB-Super- ... 2269834510

Re: Where to buy a compatible adapter?

Posted: Tue Dec 27, 2016 8:34 am
by fordman
Hi yes that type of adapter is good for fords because it has the hs can and ms can switch.

Re: Where to buy a compatible adapter?

Posted: Mon Jan 02, 2017 9:30 pm
by idbooter
Would this adapter work with ford? Thanks.
http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... 2115168398

Re: Where to buy a compatible adapter?

Posted: Mon Jan 02, 2017 11:35 pm
by fordman
Hi
According to the spec it does covers the standard ford protocol. The modules on the Hs can bus would be accessible but not the one's on the Ms can bus (no switch). Bluetooth devices can be a bit hit or miss if they work regardless of specifications. I have had some that have worked and some that have not. Hope this helps.

idbooter

Posted: Tue Jan 03, 2017 10:10 pm
by idbooter
Thanks.

Just curious, if specs cover the MS CAN speed, 11*bit ID, 125*kbaud. Why do you need a switch?

[/u]
fordman wrote:Hi
According to the spec it does covers the standard ford protocol. The modules on the Hs can bus would be accessible but not the one's on the Ms can bus (no switch). Bluetooth devices can be a bit hit or miss if they work regardless of specifications. I have had some that have worked and some that have not. Hope this helps.

Re: Where to buy a compatible adapter?

Posted: Tue Jan 03, 2017 11:33 pm
by fred08155
Ford uses an additional connection for MS-CAN on Pin 3 & Pin 11. This is not covered by standard OBD layout. So adapter needs to be modified for vendor specific diagnostics.

Standard OBDII pinout as specified
http://pinoutguide.com/CarElectronics/c ... nout.shtml

vendor specific pinout of Ford
http://pinoutguide.com/CarElectronics/f ... nout.shtml

Re: Where to buy a compatible adapter?

Posted: Tue Jan 17, 2017 4:23 pm
by Dmitriy32
https://ru.aliexpress.com/item/Diagnost ... -eub6yrrBy
вот этот заказал связывается с Forscan на ура Mazda 6 GG 1.8