Connecting to individual modules for bench testing

Discussion about adapters and connections - usage, problems, solutions
Post Reply
MJL2906
Posts: 3
Joined: Sat Dec 22, 2018 4:30 pm
Vehicle: 2005 Focus 2.0 Petrol Zetec
Location: London, England

Connecting to individual modules for bench testing

Post by MJL2906 »

Hi there,

I'm trying to connect Forscan to individual modules for bench testing and programming after repairs to said modules. At the moment I'm only testing it on Instrument clusters (MK2 Focus, MK2 Kuga specifially), and have discovered that Forscan will only connect if the PCM is present. Is there any plans to allow Forscan to interface with just one module at a time for circumstances like this?

Thanks, Michael.
Ecmbuster
Posts: 1000
Joined: Sun Mar 15, 2015 4:08 am
Vehicle: Volvo Bertone and two Motorcyles
Location: On a spinning rock

Re: Connecting to individual modules for bench testing

Post by Ecmbuster »

You may want to send the FORScan staff a message about your idea.
This was asked a few days ago with a response:
'viewtopic.php?f=5&t=15920
Do not ask for help in PM. Use the forum to ask and answer questions!
Post Reply