Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

[jSONBB]

nonContinuousModeDetailedReport_2002__Ford__Escape__GLOBAL_OBDII__01052023152506.pdf
Report of non Continuous DTCs as reported by the Mitchell MD-350. FORScan does not know what multiples of these tests are - gives incorrect data output. I will update this with the list of DTCs from FORScan later today for comparison.

These are the missing "unknown" tests from FORScan, the Mitchell J2534 correctly reports them.

Capture.PNG (83.42 KiB) Viewed 1815 times

Correct test data pids

Capture1.PNG (72.49 KiB) Viewed 1815 times

Pls update these in FORScan

[jSONBB]

nonContinuousModeDetailedReport_2002__Ford__Escape__GLOBAL_OBDII__01052023152506.pdf
Report of non Continuous DTCs as reported by the Mitchell MD-350. FORScan does not know what multiples of these tests are - gives incorrect data output. I will update this with the list of DTCs from FORScan later today for comparison.

This is how MODE 6 is identified with FORScan with a J2534-2 device and Bluetooth adapter.
You are incorrect trying to operate that tool, all it did is generate a report from itself, NOT FORScan!
Misfire mode6.jpg

I do understand how to operate this tool, I am trying to show comparison for test data that FORScan doesn't understand; as it shows "unknown" in the Mode 6 list.

[Ecmbuster]

Bosch M-VCI (Mastertech)

https://www.boschdiagnostics.com/softwa ... osch-m-vci

Install Windows 7
1) M-VCI_Setup_v13.2.6.exe
2) M-VCI_Setup_v13.3.18.exe

Go to C:\Program Files (x86)\Bosch\VTX-VCI\VCI Software (M-VCI)\J2534 Configuration
Send J2534ConfigApp.exe to desktop

Install Windows 10
Use compatability mode for Windows 7 for both files
1) M-VCI_Setup_v13.2.6.exe
2) M-VCI_Setup_v13.3.18.exe

Go to C:\Program Files (x86)\Bosch\VTX-VCI\VCI Software (M-VCI)\J2534 Configuration
Send J2534ConfigApp.exe to desktop

Use the USB connection NOT WiFi for diagnostics and programming.
All other applications will be on the desktop - Success with a 2020 F150 5.0L 4WD

FORScan_M-VCI.png (77.27 KiB) Viewed 1532 times

[djdekl]

I can't program the BCMI Ford Focus MK 3.5 with the original UCDS cable. Message: the cable is not suitable. Everything worked last week.

[stimpy88]

Isn't UCDS basically ransomware now? Maybe your cable "phoned home"? I hear they no longer sell tokens or hardware, yet they don't unlock the software.

We always said UCDS was a nasty business model that leaves you at the mercy of the developer and their shady token based system.

[Ghano38]

I have been using UCDS for more than two years now and i never had an issue with,all you have is connecte it to internet once a week to activate the license,Ford softwares IDS,FDRS,FJDS use the same system to be activated and the license is specific to one laptop,Forscan uses two months free license or one year payed one,all these softwares are complimentary ones at list forIDS Forscan and UCDS for diagnosis,modules programming and updates and you need to use all of them some times when the vehicle is 2018 or older,both Forscan and UCDS dont have the ability to program PATS for 2011 and newer cars,concerning the tokens,i have never used the ones i have yet.

[anonymius]

forscan-ucds.jpg (177.5 KiB) Viewed 807 times

[vilkur]

forscan-ucds.jpg

Same problem with the original VCM-II and VCM-3...

[tractmec]

forscan-ucds.jpg

Same problem with the original VCM-II and VCM-3...

Use the Support instructions at the heading "Providing FORScan Debug Information" at this link https://forscan.org/contactus.html!