Focus 3-Sync 1 to Sync 3 pinout

Discussion about adapters and connections - usage, problems, solutions
Ghano38
Posts: 401
Joined: Sat Dec 07, 2019 9:10 am
Vehicle: Ford c max

Re: Focus 3-Sync 1 to Sync 3 pinout

Post by Ghano38 »

You don't need to update the parking aide module,European navigation modules have 64gb non navigation ones have 16 and 32gb,i don't remember exactl witch ones are 64,32 or 16 but you can find this easily by searching in the cyanlabs site,keep in mind that non navigation modules can't be updated with navigation sw.
alpdbg
Posts: 20
Joined: Wed May 26, 2021 11:14 am
Vehicle: Focus mk3, 1.6 TDCi, 2012

Re: Focus 3-Sync 1 to Sync 3 pinout

Post by alpdbg »

This is not needed(I will update it to 3.4)? https://community.cyanlabs.net/t/enabli ... pgrade/555
alpdbg
Posts: 20
Joined: Wed May 26, 2021 11:14 am
Vehicle: Focus mk3, 1.6 TDCi, 2012

Re: Focus 3-Sync 1 to Sync 3 pinout

Post by alpdbg »

Ghano38 wrote:
Tue Jul 27, 2021 6:22 pm
You don't need to update the parking aide module,European navigation modules have 64gb non navigation ones have 16 and 32gb,i don't remember exactl witch ones are 64,32 or 16 but you can find this easily by searching in the cyanlabs site,keep in mind that non navigation modules can't be updated with navigation sw.
When im importing facelift .ab- my engine is 1.6 and there isbonly 1.5 engines and also I cant find with acc. Can I deactivate facelift features and activate my acc and other things after import? Is it a problem that its not same engine? Transmission, fuel and main features are same.
Ghano38
Posts: 401
Joined: Sat Dec 07, 2019 9:10 am
Vehicle: Ford c max

Re: Focus 3-Sync 1 to Sync 3 pinout

Post by Ghano38 »

Only early 2017 facelift Focus are equipped with Sync 3,when you upload the as built try to make it much to your car as possible,the engine cylinder dos not matter since it's 1.5tdci,the APIM needs only some informations to work correctly with your car such as parking aid,rear view camera,automatic climate control,heated seats and stirring wheel,right or left hand drive other features such adaptive cruise control,auto high beam,are not needed however you can activate and deactivate features manually through APIM central configuration(main).
Use this link to compare your as built and if you need
some VIN's let me know
http://ford.xtlt.ru/ab/ by the way i'am retrofitting acc to my car but i need the radar appropriate software since i installed a Volvo one(not the module behind the glove box) if can send me this i will so grateful.
alpdbg
Posts: 20
Joined: Wed May 26, 2021 11:14 am
Vehicle: Focus mk3, 1.6 TDCi, 2012

Re: Focus 3-Sync 1 to Sync 3 pinout

Post by alpdbg »

I can send it after 10 september. Im going to take it from Germany.
Ghano38
Posts: 401
Joined: Sat Dec 07, 2019 9:10 am
Vehicle: Ford c max

Re: Focus 3-Sync 1 to Sync 3 pinout

Post by Ghano38 »

Ok
alpdbg
Posts: 20
Joined: Wed May 26, 2021 11:14 am
Vehicle: Focus mk3, 1.6 TDCi, 2012

Re: Focus 3-Sync 1 to Sync 3 pinout

Post by alpdbg »

I have same focus(without lane assist, acc and etc) but im selling it and after finishing summer season im going to take better one with full extras. And Im trying to prepare everything and when I take it to change the system immediatly because this one is awful. Because of that I can send it after 10.09. Sorry.
Post Reply