Forscan 2.4.x - UCDS pro +

Discussion about adapters and connections - usage, problems, solutions
User avatar
fordsmax471
Posts: 907
Joined: Mon Aug 07, 2017 5:29 pm
Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift

Re: Forscan 2.4.x - UCDS pro +

Post by fordsmax471 »

wrong setup in forscan
FORScan 2.4.3/UCDS 4/Elitebook G6/Win10 pro
armsdigital
Posts: 9
Joined: Sun Jun 19, 2016 7:24 am
Vehicle: Fiesta 2014

Re: Forscan 2.4.x - UCDS pro +

Post by armsdigital »

Just tried using this setup but still not able to connect
Did i missed something else?
Untitled.png
Untitled.png (248.76 KiB) Viewed 1142 times
fedosis
Posts: 4
Joined: Thu Aug 02, 2018 6:50 pm
Vehicle: Mazda CX-7 L3-T 2.3 2006
Location: Muransk, Russia

Re: Forscan 2.4.x - UCDS pro +

Post by fedosis »

Where can i get FOrscan 2.4.x beta?
f-wolf
Posts: 1011
Joined: Sat Apr 18, 2015 12:41 am
Vehicle: *** Ford ***
Location: Third planet from the sun

Re: Forscan 2.4.x - UCDS pro +

Post by f-wolf »

fedosis wrote:
Wed Oct 21, 2020 5:43 pm
Where can i get FOrscan 2.4.x beta?
FORScan

Update 2020-09-23: v2.4 is temporarily removed from the site because of number of people that don't really understand what they do and brick their modules or even cars, then panicking and attack our support and paralyze our normal work.


viewtopic.php?f=16&t=14885
fedosis
Posts: 4
Joined: Thu Aug 02, 2018 6:50 pm
Vehicle: Mazda CX-7 L3-T 2.3 2006
Location: Muransk, Russia

Re: Forscan 2.4.x - UCDS pro +

Post by fedosis »

f-wolf wrote:
Wed Oct 21, 2020 9:29 pm
I understand what I do.
And never flood in case of abnormal beta behavior
mag106
Posts: 11
Joined: Sun Dec 13, 2015 2:40 pm
Vehicle: Focus 3, 2.0 PS, седан, 20012г.

Re: Forscan 2.4.x - UCDS pro +

Post by mag106 »

cezarg1410 wrote:
Mon Sep 14, 2020 11:41 am
Hello,
i am trying to use Forscan with chinese UCDS PRO+.
Forscan is correctly recognizing the J2534 adapter and it connects to the car without any problems.
But - if i want to read AsBuilt data from ANY module - then forscan freezes on reading the first block...
Maybe anybody know how to solve that?
hi, how did you make this adapter work with forscan, I have forscan 2.4.3 does not see the adapter ???
Ecmbuster
Posts: 1303
Joined: Sun Mar 15, 2015 4:08 am
Vehicle: Volvo Bertone and two Motorcyles
Location: On a spinning rock

Re: Forscan 2.4.x - UCDS pro +

Post by Ecmbuster »

Load the software that is with the UCDS, apply the drivers when connected.
If UCDS is a true J2534 adapter, use this setup with FORScan.
If it is not connecting, then the clone is not a true J2534.
J2534.JPG
J2534.JPG (268.65 KiB) Viewed 477 times
Do not ask for help in PM. Use the forum to ask and answer questions!
mag106
Posts: 11
Joined: Sun Dec 13, 2015 2:40 pm
Vehicle: Focus 3, 2.0 PS, седан, 20012г.

Re: Forscan 2.4.x - UCDS pro +

Post by mag106 »

Ecmbuster wrote:
Wed Jun 16, 2021 4:14 pm
Load the software that is with the UCDS, apply the drivers when connected.
If UCDS is a true J2534 adapter, use this setup with FORScan.
If it is not connecting, then the clone is not a true J2534.
J2534.JPG
Looks like my clone is too bad to support j2534, does not connect :x Image
Attachments
no connect
no connect
no coonect.png (145.15 KiB) Viewed 470 times
Ecmbuster
Posts: 1303
Joined: Sun Mar 15, 2015 4:08 am
Vehicle: Volvo Bertone and two Motorcyles
Location: On a spinning rock

Re: Forscan 2.4.x - UCDS pro +

Post by Ecmbuster »

mag106 wrote:
Wed Jun 16, 2021 4:27 pm
Ecmbuster wrote:
Wed Jun 16, 2021 4:14 pm
Load the software that is with the UCDS, apply the drivers when connected.
If UCDS is a true J2534 adapter, use this setup with FORScan.
If it is not connecting, then the clone is not a true J2534.
J2534.JPG
Looks like my clone is too bad to support j2534, does not connect :x Image
You proved the chinese clone is another POS (Кусок дерьма). Well done!
Do not ask for help in PM. Use the forum to ask and answer questions!
davetcollection
Posts: 81
Joined: Sun Mar 19, 2017 4:00 pm
Vehicle: Focus '17 ST-Line 1.0 Auto, Focus 4 1.5D Titanium

Re: Forscan 2.4.x - UCDS pro +

Post by davetcollection »

Ecmbuster wrote:
Thu Jun 17, 2021 1:40 am
mag106 wrote:
Wed Jun 16, 2021 4:27 pm
Ecmbuster wrote:
Wed Jun 16, 2021 4:14 pm
Load the software that is with the UCDS, apply the drivers when connected.
If UCDS is a true J2534 adapter, use this setup with FORScan.
If it is not connecting, then the clone is not a true J2534.
J2534.JPG
Looks like my clone is too bad to support j2534, does not connect :x Image
You proved the chinese clone is another POS (Кусок дерьма). Well done!
I rest my case
Post Reply