Service Procedure has been interupted

Discussion about adapters and connections - usage, problems, solutions
Post Reply
Posts: 2
Joined: Thu Sep 12, 2019 2:20 am
Vehicle: Ford F150 5.3 V6 2013

Service Procedure has been interupted

Post by gplavergne23 » Sat Sep 21, 2019 1:31 am


Newbie here, I have a 2013 F150 Platinum with a tire pressure sensor light on that I am trying to remove.

I am the newest Beta EL version of Forscan (2.3.24) and I am using a WIFI FORScan OBD2 Adapter, OHP ELM327 connecting via WIFI.

Everything works great until I am in the "Configuration and Programming" section, when I disable the TPMS and "write" it goes to 50% then gives me this error code:

18:14:24:241 This adapter has CAN bus compatibility problems and can not be used in some functions
18:14:39:400 Service procedure has been interrupted

Before assuming I just need to buy a different module (possibly a usb or a bluetooth) i wanted to confirm that it is just my junky OBD2 adapter.

Appreciate the help! Hopefully I gave enough info

Posts: 627
Joined: Mon Feb 06, 2017 3:00 pm
Vehicle: ford focus 16 zetec

Re: Service Procedure has been interupted

Post by denbo » Wed Oct 09, 2019 1:57 pm

I have never had any success programming with bluetooth. With USB, no problems.

User avatar
Posts: 549
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: Service Procedure has been interupted

Post by Andyfocus » Thu Oct 10, 2019 2:22 am

programming is disabled with wifi by default due to drop outs and other wifi problems to stop people from bricking thier modules .
it is in the release notes.
i am the same as you just a forscan user still learning .
The search function is there for a reason use it.
no you can no longer pm me with your 1 or 0 posts so dont try.

Post Reply