Traffic sign recognition on Fiesta MK8 >2017

Car configuration discussions and experience sharing
Dragunov
Posts: 101
Joined: Thu Aug 25, 2016 8:55 am
Vehicle: Ford Mondeo MK5 Titanium 2.0TDCi 150HP

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by Dragunov » Wed Nov 06, 2019 11:47 am

Looking forward to it, same with Driver Alert

roylion15
Posts: 36
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by roylion15 » Wed Nov 06, 2019 2:18 pm

DA (Driver Alert) on Fiesta mk8

720-01-02 x8xx-xxxx-xxxx change value 8 to A (activate driver alert in assistance menu IPC )

Dragunov
Posts: 101
Joined: Thu Aug 25, 2016 8:55 am
Vehicle: Ford Mondeo MK5 Titanium 2.0TDCi 150HP

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by Dragunov » Wed Nov 06, 2019 5:40 pm

Thanks!

No need to activate it on other places?

c.piano
Posts: 26
Joined: Fri Mar 29, 2019 3:55 pm
Vehicle: Fiesta MK8 1.5 85cv

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by c.piano » Wed Nov 06, 2019 10:51 pm

Its needed. The ipma its the module that control the camera.. i think that it is necessary edit parameters on this module

We have to wait codes of john

kevin.pregnolato
Posts: 1
Joined: Wed Aug 21, 2019 11:42 am
Vehicle: Ford Fiesta 1.5 85cv 2017

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by kevin.pregnolato » Thu Nov 07, 2019 11:21 am

johnis wrote:
Mon Oct 28, 2019 7:55 pm
I did it !!!
https://www.youtube.com/watch?v=dLEMpI7DyDU
Can you share the IPMA configuration for Auto High Beam? Thank you

roylion15
Posts: 36
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by roylion15 » Thu Nov 07, 2019 11:42 am

Dragunov wrote:
Wed Nov 06, 2019 5:40 pm
Thanks!
No need to activate it on other places?
I don't know exactly how it works, but the option appears well in the IPC with this change.

It seems that the system works with the lane departure system "activated".

@Johnis
I'm also waiting for TSR codes, please

c.piano
Posts: 26
Joined: Fri Mar 29, 2019 3:55 pm
Vehicle: Fiesta MK8 1.5 85cv

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by c.piano » Fri Nov 08, 2019 5:03 pm

Sorry, for automatic lamps... I don’t understand what parameters changed and wich module you have edited?...IPC and?

Sorry for my bad English. I am italian

fred4009
Posts: 37
Joined: Sun May 26, 2019 5:34 pm
Vehicle: Ford fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by fred4009 » Sat Nov 09, 2019 6:52 am

hello i have installed without problem the driver alert thank you, I wait for the codes for auto highbeam😀

merlin_gr
Posts: 3
Joined: Mon Oct 30, 2017 11:06 am
Vehicle: Fiesta St line mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by merlin_gr » Tue Nov 12, 2019 6:19 pm

johnis wrote:
Tue Oct 29, 2019 9:41 am
No I did not install any hardware.
My car has no Navigation.
I made some changes to IPMA , IPC and SCCM (maybe on BdyCm too).
I put some codes from a Titanium but i am not sure if all were necessary.
(In my Country Titaniums have Auto high beam, traffic sign recognition and rain sensing wipers as standard. )

Unfortunatelly I did not make rain sensor work.

I am not 100% sure if all changes i made were necessary but i faced no problems either.
I am not a professional.
I tested it successfully on two cars so far.
I will make a pdf file and post it here.
Hey mate, any news?
Thanks in advance.

fragian1991
Posts: 1
Joined: Mon Sep 10, 2018 11:45 am
Vehicle: ford fiesta st line

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by fragian1991 » Fri Nov 22, 2019 4:36 pm

fred4009 wrote:
Sat Nov 09, 2019 6:52 am
hello i have installed without problem the driver alert thank you, I wait for the codes for auto highbeam😀
hi I have activated via ipc driver alert but unfortunately in the entry information is not available how can I do ?? should any other parameter be activated?

Post Reply