Traffic sign recognition on Fiesta MK8 >2017

Car configuration discussions and experience sharing
ThommyV
Posts: 5
Joined: Fri Feb 10, 2017 9:40 am
Vehicle: Ford Fiesta ST-line 1.0 ecoboost 101hp 2018 MK8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by ThommyV » Tue Jan 07, 2020 8:52 am

Hello,

Should a H1BT-19H406-BE do the job?

fred4009
Posts: 37
Joined: Sun May 26, 2019 5:34 pm
Vehicle: Ford fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by fred4009 » Tue Jan 07, 2020 10:13 am

Hello yes

alextheboss96
Posts: 9
Joined: Sat Nov 02, 2019 6:11 pm
Vehicle: Fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by alextheboss96 » Wed Jan 22, 2020 7:34 am

fred4009 wrote:
Tue Jan 07, 2020 10:13 am
Hello yes
Hello,
I removed the plastic of the camera at my center mirror and the part number it has is H1BT-19H406-CE. Everything changes correctly but SCCM as built. After it informs me about wrong checksum and i press "ok", It gives me an error "Service procedure has been interrupted".
Any hint?
Thanks

fred4009
Posts: 37
Joined: Sun May 26, 2019 5:34 pm
Vehicle: Ford fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by fred4009 » Thu Jan 23, 2020 12:41 pm

Hello
do you have the extended forscan license? the camera number ending with CE is the best performing camera
😀

alextheboss96
Posts: 9
Joined: Sat Nov 02, 2019 6:11 pm
Vehicle: Fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by alextheboss96 » Thu Jan 23, 2020 4:06 pm

fred4009 wrote:
Thu Jan 23, 2020 12:41 pm
Hello
do you have the extended forscan license? the camera number ending with CE is the best performing camera
😀
Yes i have free xtended license until 10-2-2020

fred4009
Posts: 37
Joined: Sun May 26, 2019 5:34 pm
Vehicle: Ford fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by fred4009 » Thu Jan 23, 2020 4:37 pm

sometimes it doesn't work the first time ... how many times have you tried? you can validate incorrect cheksum it is not a problem
what options do you have that work? :D

alextheboss96
Posts: 9
Joined: Sat Nov 02, 2019 6:11 pm
Vehicle: Fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by alextheboss96 » Thu Jan 23, 2020 6:49 pm

DA , AHB, TSR are appeared in the cluster menu. I havent tested AHB,DA yet. Is there any certain order that i should apply the settings in forscan?
Its weird, i tried about 5 times in total, also unplugging and plugging the obd again.

fred4009
Posts: 37
Joined: Sun May 26, 2019 5:34 pm
Vehicle: Ford fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by fred4009 » Thu Jan 23, 2020 9:24 pm

you must configure in any order forscan settings and accept the configuration with incorrect cheksum
you bought a CE camera? what was your original camera?
CE camera is for emergency stop ,adaptive regulator and traffic detection

alextheboss96
Posts: 9
Joined: Sat Nov 02, 2019 6:11 pm
Vehicle: Fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by alextheboss96 » Thu Jan 23, 2020 9:41 pm

That is my original camera. Didn't install anything extra.
One more thing thats weird, the ahb icon at the top right isnt appeared but the setting for enabling ahb exists in the vehicle settings >lighting > auto highbeam.
Last edited by alextheboss96 on Thu Jan 23, 2020 9:55 pm, edited 1 time in total.

fred4009
Posts: 37
Joined: Sun May 26, 2019 5:34 pm
Vehicle: Ford fiesta mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by fred4009 » Thu Jan 23, 2020 9:54 pm

and you didn't have AHB TSR and DA?what options do you have?Can you give me your vin number in private please?
Last edited by fred4009 on Thu Jan 23, 2020 9:56 pm, edited 4 times in total.

Post Reply