Traffic sign recognition on Fiesta MK8 >2017

Car configuration discussions and experience sharing
roylion15
Posts: 183
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by roylion15 » Wed Jul 01, 2020 11:45 pm

Hello
May work but not sure ...
What part number do you currently have on your vehicle ?
If you don’t know, send your vin in PM.
Thanks
No support in PM without invitation, please ! - Holidays to 31 august 2020

Amel
Posts: 7
Joined: Thu Jul 16, 2020 10:15 am
Vehicle: Ford Fiesta mk8 1.0 125 hp

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by Amel » Tue Jul 21, 2020 10:43 am

Can somebody help me with the sign and auto high beam?

Idk what to give you but my calibration S/W nummber is GB5T-14G375-AA
assembly number H1BT-14G371-AFC

Hope that helps

Amel
Posts: 7
Joined: Thu Jul 16, 2020 10:15 am
Vehicle: Ford Fiesta mk8 1.0 125 hp

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by Amel » Tue Jul 21, 2020 11:43 am

Amel wrote:
Tue Jul 21, 2020 10:43 am
Can somebody help me with the sign and auto high beam?

Idk what to give you but my calibration S/W nummber is GB5T-14G375-AA
assembly number H1BT-14G371-AFC

Hope that helps
If i forgot something please say

User avatar
auron899
Posts: 6
Joined: Tue May 23, 2017 5:32 pm
Vehicle: Ford Focus ST MK3.5
Location: Italy

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by auron899 » Wed Jul 22, 2020 9:26 am

Hi guys, anyeone tried update the IPMA calibration of the camera A* to a calibration used on B* or C*? If the hw is the same, and the difference is just the calibration software, this may avoid IPMA replacment.

edit:
Just did a bit of analysis and memory area are the same across all calibrations, so yeah it COULD work... i'll let you know :lol: :lol:

waldi889
Posts: 2
Joined: Wed Jun 03, 2020 4:47 pm
Vehicle: Ford Tourneo Custom L2 Titanium 2020

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by waldi889 » Thu Jul 23, 2020 9:50 am

Sorry for writing in this fiesta topic but it's the same topic I have:

I have a new Tourneo Custom 2020 and I tried to enable TSR and IACC via Forscan but I failed.
I have AHB, ACC, LKS, PCA, DA, CTA but no TSR because I had to order Navi for that.

In IPC I enabled IACC and TSR and I have the menu now in BC but when I drive and try to activate it it tells me that he can't activate it. I red in a different forum that I have to activate it also in IPMA but the codes I got failed. By writing back it stops at 64% and afterwards old values are there.

Cam should be high enough to-do it or not? Can anybody help please? Thanks in advance!

Waldi

CoD21
Posts: 100
Joined: Wed May 13, 2020 8:56 am
Vehicle: Ford Fiesta MK8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by CoD21 » Wed Jul 29, 2020 3:03 pm

can someone, who added a new camera, post a picture of the connector/cables that go into the camera? i'm not sure if it works after changing the camera because not every spot in the connector has a cable

CoD21
Posts: 100
Joined: Wed May 13, 2020 8:56 am
Vehicle: Ford Fiesta MK8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by CoD21 » Fri Jul 31, 2020 5:50 pm

i bought a Bx camera and it arrived today.

can i just remove the old camera and replace it with the new one (like plug and play)? or do i have to save the configuration of the old camera, then install the new camera and install the configuration from the old camera to the new camera?

CoD21
Posts: 100
Joined: Wed May 13, 2020 8:56 am
Vehicle: Ford Fiesta MK8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by CoD21 » Wed Aug 05, 2020 7:11 pm

In ipc do i have to acitvate „auto high beam telltale“ and „Auto high beam Option in productivity Screen“? Or just one?

Themorrys
Posts: 9
Joined: Tue Feb 11, 2020 1:37 pm
Vehicle: Ford Focus 1.0 125cv Active 2019

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by Themorrys » Wed Aug 05, 2020 10:12 pm

@CoD21
IPMA ASBUILT, IPC ASBUILT, SCCM ASBUILT, BdyCM ASBUILT
- Vamos al IPMA AS BUILT.
- La línea 706-01-01 – 0407 55BB A5 | 0407 59BB A5 / CAMBIAMOS EL VALOR DE COLOR
AMARILLO POR EL DE COLOR ROJO
- LE DAMOS AL BOTON WHITE ALL Y SI NOS PIDE REINICIAR EL COCHE LO HACEMOS.
- Vamos al IPC AS BUILT.
- La línea 720-01-01 – 0C4A 3464 28 | 0C4E 3464 2A / CAMBIAMOS LOS VALORES DE
COLOR AMARILLO POR EL DE COLOR ROJO
- LE DAMOS AL BOTON WHITE ALL Y SI NOS PIDE REINICIAR EL COCHE LO HACEMOS.
- Vamos al SCCM AS BUILT
- La línea 724-02-01 – 9508 6840 60 | 9508 7040 60 / CAMBIAMOS LOS VALORES DE
COLOR AMARILLO POR EL DE COLOR ROJO
- LE DAMOS AL BOTON WHITE ALL Y SI NOS PIDE REINICIAR EL COCHE LO HACEMOS.
- Vamos al BdyCM AS BUILT
- LA LINEA PARA FAROS FULL LED 726-11-04 - 3205 0241 D1 | 3205 02C1 D1
- LA LINEA PARA FAROS HALOGENOS 726-11-04 - 3202 0249 E1 | 3201 0249 E1
- LINEA PARA LOS DOS TIPOS DE FAROS 726-12-02 – 0202 2200 02 | 0102 2200 02
- LE DAMOS AL BOTON WHITE ALL Y SI NOS PIDE REINICIAR EL COCHE LO HACEMOS.

CoD21
Posts: 100
Joined: Wed May 13, 2020 8:56 am
Vehicle: Ford Fiesta MK8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by CoD21 » Fri Aug 07, 2020 6:29 pm

@Themorrys
thank you

is it possible to activate the intelligent limiter or adaptive (not intelligent!) cruise controle with tsr enabled?

Post Reply