Traffic sign recognition on Fiesta MK8 >2017

Car configuration discussions and experience sharing
ThommyV
Posts: 6
Joined: Fri Feb 10, 2017 9:40 am
Vehicle: Ford Fiesta ST-line 1.0 ecoboost 101hp 2018 MK8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by ThommyV » Tue Sep 17, 2019 8:43 am

Nothing new yet??

c.piano
Posts: 26
Joined: Fri Mar 29, 2019 3:55 pm
Vehicle: Fiesta MK8 1.5 85cv

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by c.piano » Sun Oct 06, 2019 8:51 am

Not working, it is impossible to write on ipma, we have to wait new versions :(

Dragunov
Posts: 104
Joined: Thu Aug 25, 2016 8:55 am
Vehicle: Ford Mondeo MK5 Titanium 2.0TDCi 150HP

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by Dragunov » Thu Oct 10, 2019 6:09 pm

I hope they add the function very soon!

c.piano
Posts: 26
Joined: Fri Mar 29, 2019 3:55 pm
Vehicle: Fiesta MK8 1.5 85cv

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by c.piano » Mon Oct 28, 2019 9:41 am

Any news?

johnis
Posts: 3
Joined: Sat Feb 23, 2019 9:11 pm
Vehicle: Fiesta Mk8 1.0 Ecoboost 2019

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by johnis » Mon Oct 28, 2019 7:55 pm


kado
Posts: 4
Joined: Fri Aug 16, 2019 5:08 pm
Vehicle: Fiesta ST mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by kado » Tue Oct 29, 2019 5:22 am

Fine 👍
Would you share the working steps in Forscan with us?
Did you install any hardware ( second frond cam ) or do you use the navigation sign recognition ?

Thanks for any information

johnis
Posts: 3
Joined: Sat Feb 23, 2019 9:11 pm
Vehicle: Fiesta Mk8 1.0 Ecoboost 2019

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by johnis » Tue Oct 29, 2019 9:41 am

No I did not install any hardware.
My car has no Navigation.
I made some changes to IPMA , IPC and SCCM (maybe on BdyCm too).
I put some codes from a Titanium but i am not sure if all were necessary.
(In my Country Titaniums have Auto high beam, traffic sign recognition and rain sensing wipers as standard. )

Unfortunatelly I did not make rain sensor work.

I am not 100% sure if all changes i made were necessary but i faced no problems either.
I am not a professional.
I tested it successfully on two cars so far.
I will make a pdf file and post it here.

kado
Posts: 4
Joined: Fri Aug 16, 2019 5:08 pm
Vehicle: Fiesta ST mk8

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by kado » Tue Oct 29, 2019 3:18 pm

Thanks for info‘s 👍

I have no auto high beam, no traffic sign recognition but rain sensing wipers and navi.

Did you have auto high beam as standard feature ?
Auto high beam could share the special cam with traffic sign recognition and rain sensor has own sensor, also possible modules are different ?

If you make pdf i will try to unlock this feature if possible.

Dragunov
Posts: 104
Joined: Thu Aug 25, 2016 8:55 am
Vehicle: Ford Mondeo MK5 Titanium 2.0TDCi 150HP

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by Dragunov » Wed Oct 30, 2019 12:43 pm

Possible to add the codes here?

c.piano
Posts: 26
Joined: Fri Mar 29, 2019 3:55 pm
Vehicle: Fiesta MK8 1.5 85cv

Re: Traffic sign recognition on Fiesta MK8 >2017

Post by c.piano » Sat Nov 02, 2019 3:36 pm

I will waiting for your codes. My problem its writing the impa :cry:

Post Reply