2018 f150 bambi mode with aux high beams hyperflash

Car configuration discussions and experience sharing
Post Reply
Lwskywalker
Posts: 1
Joined: Tue May 14, 2019 7:01 pm
Vehicle: f150 3.5eco

2018 f150 bambi mode with aux high beams hyperflash

Post by Lwskywalker » Thu May 23, 2019 5:54 pm

Hey All,

I have kdm's foglight bracket which houses 2 led 3inch pods for both driver and passenger side. Fog LEDs are spliced into fog light harness and High beam pods are spliced into high beam harness.

Problem I've encountered and curious if anyone else has experienced is:

Bambi mode enabled and all led pods and factory lights function. Turn signals however are hyper flashing on the cluster only. Factory halogens front and blis rear. Signals on exterior of truck, halogen and led function in the normal fashion. Thoughts?

DXB
Posts: 2
Joined: Thu Aug 08, 2019 8:16 pm
Vehicle: 2018 Ford F150 5.0L Regular Cab XLT

Re: 2018 f150 bambi mode with aux high beams hyperflash

Post by DXB » Thu Aug 22, 2019 9:05 pm

the power your LED are drawing is very small compared to regular Halogen lights..

there are 2 ways to fix your hyper flash..

first option being add a resistor to your lights that were installed modified..

2nd option is to go program it with forscan as to not detect low draw You can search the forum for hyperflash fixes and it will give you many posts of user and what they have encountered and how they fixed it with forscan..

Post Reply