ECU delphi map change 140-163 ?

Car configuration discussions and experience sharing
Post Reply
adixx87
Posts: 3
Joined: Sat Feb 02, 2019 2:03 pm
Vehicle: ford galaxy 2.0tdci 140ps PS 2014

ECU delphi map change 140-163 ?

Post by adixx87 » Sat Feb 23, 2019 8:10 pm

Hi.

Is there an option to switch the map in delphi ECU for 2.0 dw10c engine using the Forscan ?

Thanks

User avatar
Andyfocus
Posts: 558
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: ECU delphi map change 140-163 ?

Post by Andyfocus » Sat Feb 23, 2019 10:08 pm

forscan does not currently support software changes updates.
can only do as built data , or change values in the data / central config .
i am the same as you just a forscan user still learning .
The search function is there for a reason use it.
no you can no longer pm me with your 1 or 0 posts so dont try.

daktona
Posts: 10
Joined: Wed May 27, 2015 4:49 pm
Vehicle: Ford Mondeo, 2.0TDCI, 140hp, 2011

Re: ECU delphi map change 140-163 ?

Post by daktona » Fri Aug 09, 2019 7:14 am

Actually the software for the 163 hp is in the BCM. You need to change from 140/320 to the 150/350. Not sure about the 300 figures from my mind, but they are the only ones. You need to change this in IPC and BCM and then reset both modules.

Post Reply