Focus 4 DRL

Car configuration discussions and experience sharing
Post Reply
Axe123
Posts: 5
Joined: Wed Dec 13, 2017 8:42 am
Vehicle: Mondeo MK5

Focus 4 DRL

Post by Axe123 » Mon Jan 28, 2019 4:13 pm

Does enybody knows which bit has to be changed in BCM to disable the DRL?

User avatar
Andyfocus
Posts: 396
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: Focus 4 DRL

Post by Andyfocus » Mon Jan 28, 2019 8:46 pm

try the IPC ;)
and change the top to eningeering mode to show hidden options .
theirs also another thread somewhere i just read with a couple of people tring to do the same thing could be worth looking their (it shows the options etc ) , and joining in .
i am the same as you just a forscan user still learning .

Axe123
Posts: 5
Joined: Wed Dec 13, 2017 8:42 am
Vehicle: Mondeo MK5

Re: Focus 4 DRL

Post by Axe123 » Tue Jan 29, 2019 5:51 am

You mean I have to change something in IPC via forscan?

User avatar
Andyfocus
Posts: 396
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: Focus 4 DRL

Post by Andyfocus » Tue Jan 29, 2019 8:44 am

should be able to change it in the ipc or bcm , ipc should have the options your looking for when you change the top left option to show engeering mode and hidden options , scroll down the list change the one u want write to module then do a reset to take effect .
i am the same as you just a forscan user still learning .

Axe123
Posts: 5
Joined: Wed Dec 13, 2017 8:42 am
Vehicle: Mondeo MK5

Re: Focus 4 DRL

Post by Axe123 » Tue Jan 29, 2019 9:29 am

What do you mean by top left option? I try to write changes in IPC, it's starts to write until 15%, than it says serrvice procedure interrupt.

User avatar
Andyfocus
Posts: 396
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: Focus 4 DRL

Post by Andyfocus » Tue Jan 29, 2019 11:06 am

u dont need to change any lines manually they are option in engeering mode to adjust it to what you want .
i am the same as you just a forscan user still learning .

Axe123
Posts: 5
Joined: Wed Dec 13, 2017 8:42 am
Vehicle: Mondeo MK5

Re: Focus 4 DRL

Post by Axe123 » Thu Feb 07, 2019 9:22 am

The problem is that IPC can not be writed with Forscan 2.3.19.

I think I have to wait for new version of FScan.

User avatar
Andyfocus
Posts: 396
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: Focus 4 DRL

Post by Andyfocus » Thu Feb 07, 2019 10:34 pm

yes seems lots are having problems at the moment with writing to modules , you could try an older version but success seems limit with that as well ,
i am the same as you just a forscan user still learning .

jon.willis@usa.net
Posts: 13
Joined: Sat Mar 23, 2019 4:30 pm
Vehicle: 2012 Ford Focus

Re: Focus 4 DRL

Post by jon.willis@usa.net » Wed Apr 24, 2019 2:05 am

Yes, change to witch mod?? None work as far as I can tell?? 2012 Focus Titanium...

davetcollection
Posts: 24
Joined: Sun Mar 19, 2017 4:00 pm
Vehicle: Focus '17 ST-Line 1.0 Auto, Focus 4 1.5D Titanium

Re: Focus 4 DRL

Post by davetcollection » Thu Apr 25, 2019 1:55 pm

2.3.20 allows you to select DRL on/off option in the IPC,
You then go into cluster menu and can tick DRL on or off

Post Reply