Transit Custom 2018

Car configuration discussions and experience sharing
Post Reply
dannyboy
Posts: 1
Joined: Wed Dec 12, 2018 8:35 am
Vehicle: Smax titanium x,2.0d,150hp,2015

Transit Custom 2018

Post by dannyboy » Mon Dec 17, 2018 3:28 pm

does anyone have a programme yet to get the uk transit custom 2018 wing mirrors to fold/unfold upon locking and un locking with the remote. also and to permanently disable start stop feature.

Mic71
Posts: 17
Joined: Mon Sep 03, 2018 5:45 pm
Vehicle: Transit custom sport 2018 sync 3

Re: Transit Custom 2018

Post by Mic71 » Wed Jan 23, 2019 4:00 pm

Would also be interested in this!
I have looked on spread sheets for other vehicles reference the mirrors. They all seem to have codes that need changing on the ddm and pdm. Drivers and passengers door modules. The custom does not have those modules?
Not sure on the start stop.
It can probably be done with looking at other fords and using those codes.

clemmy
Posts: 1
Joined: Wed Jan 30, 2019 3:48 pm
Vehicle: Ford Tourneo Custom 170hp, 2016

Re: Transit Custom 2018

Post by clemmy » Wed Jan 30, 2019 4:19 pm

I don't know about forscan, but for the start & stop, you can permanently disable it by adding a wire to an empty connector located below driver seat. I don't recall the exact details, but you can download the BEMM manual on Ford etis website, and it will be described with detail.

Maybe you'll have to connect one specific pin of that empty connector to ground, or something like that

mtomo36
Posts: 1
Joined: Wed May 29, 2019 5:33 pm
Vehicle: transit custom 2.2 dciv 2015

Re: Transit Custom 2018

Post by mtomo36 » Thu Aug 22, 2019 9:29 am

You cant do auto fold mirrors or windows up and transit customs.
They dont have door modules so cant be programmed in, has to be done via relays.

Post Reply