Page 1 of 1

Ford Kuga - Enable Reversing Camera

Posted: Fri Oct 19, 2018 6:54 pm
by Kugaman
Hi All,

For days now I have been searching the internet looking for the code to change in Forscan to enable in my Sync 2 system a third part reversing camera. For love nor money I cant find it. Before starting the project I thought I had this code but somehow have miss placed this information.

Not sure if the year of the car make any difference, but its Ford Kuga 65 Plate and Sync2 system

Please, please can anyone help me ;) . Thank you

Simon

Re: Ford Kuga - Enable Reversing Camera

Posted: Fri Oct 19, 2018 9:44 pm
by semiho
7D0-01-01 x*xx xxxx xxxx

set * to

3: With Camera No PDC (parking distance control)
9: No camera with PDC
B: With Camera with PDC

Re: Ford Kuga - Enable Reversing Camera

Posted: Fri Oct 19, 2018 11:19 pm
by Kugaman
Thank you so so much I am so appreciative, what section of forscan is the code “wrench” etc

Re: Ford Kuga - Enable Reversing Camera

Posted: Sat Oct 20, 2018 11:01 am
by semiho
YW. Chip icon is for configuration and as built programming. Find and select APIM (as built) and click play.

Re: Ford Kuga - Enable Reversing Camera

Posted: Sat Oct 20, 2018 6:08 pm
by Kugaman
Semiho Thank you for all your help, very much appreciated, if that works you have made my day :P :P :P

Re: Ford Kuga - Enable Reversing Camera

Posted: Thu Nov 29, 2018 9:15 pm
by VictorKitching
semiho wrote:
Fri Oct 19, 2018 9:44 pm
7D0-01-01 x*xx xxxx xxxx

set * to

3: With Camera No PDC (parking distance control)
9: No camera with PDC
B: With Camera with PDC
I have just used the information to activate a after market camera on my 66plate Kuga.Have set the code to B ie camera with PDC but the centreline and guidelines are missing do you know the code for the activation.Thank you for the help.

Re: Ford Kuga - Enable Reversing Camera

Posted: Fri Nov 30, 2018 12:02 am
by 12voltWILL
The guidelines come from the camera itself. Some aftermarket cameras have them and some don't. There is no way to activate them.

Re: Ford Kuga - Enable Reversing Camera

Posted: Sun Dec 02, 2018 9:03 am
by VictorKitching
12voltWILL wrote:
Fri Nov 30, 2018 12:02 am
The guidelines come from the camera itself. Some aftermarket cameras have them and some don't. There is no way to activate them.
Thanks for your reply,I have the guide lines generated from the camera the lines I"am after are the active guidelines generated by the steering angle.