Cannot find BCM configuration on Ford Everest 2.0L Titanium 2018MY

Car configuration discussions and experience sharing
Post Reply
tienbamboo
Posts: 5
Joined: Fri Dec 22, 2017 10:50 am
Vehicle: Ford Ranger Wildtrack 3.2 2017

Cannot find BCM configuration on Ford Everest 2.0L Titanium 2018MY

Post by tienbamboo »

Hi everyone,

I have a problem with Ford Everest 2.0L Titanium 2018MY when I read data with Forscan (v2.3.17)
I don't see BCM module in configuration menu (I tested with 3 same model cars)!
and Forscan cannot "run service procedure" with PCM module too (It's always interrupted)

I checked as-built data on www.motorcraftservice.com/AsBuilt for VIN: MNCAXXMAWAJU56427 but I still see BCM data (Lines 726-xx-xx)
So Forscan cannot read BCM module on new Everest model yet, can it?

Please help me, thanks!
ipandachief
Posts: 1
Joined: Tue Dec 18, 2018 7:53 am
Vehicle: Ford Everest Titanium Plus 2.0L 10 AT 2WD

Re: Cannot find BCM configuration on Ford Everest 2.0L Titanium 2018MY

Post by ipandachief »

Same problem here, I have the Everest 2.0 L MY2018 as well but cannot find the BCM and got interupted everytime I try to start the PCM. Maybe we would need to wait for next update? :)
bugzila
Posts: 5
Joined: Fri May 19, 2017 9:12 am
Vehicle: ford everest 2.2
Location: thailand

Re: Cannot find BCM configuration on Ford Everest 2.0L Titanium 2018MY

Post by bugzila »

I guest the database has been updated on FORScan for Windows version 2.3.19 beta or later
https://forscan.org/download/FORScanSe ... 9.beta.exe
bartpix
Posts: 1
Joined: Sat Dec 01, 2018 1:43 pm
Vehicle: Ford Everest 2.0 Diesel 2018

Re: Cannot find BCM configuration on Ford Everest 2.0L Titanium 2018MY

Post by bartpix »

Hi All,
I'm in Thailand and have the 2018 Titanium+ 2.0L. Using the 23.1.9 version tried to change the 12volt power points to shut off within 5 seconds of turning the ignition off without success. If anyone has the correct codes for this mod, please let me know.
deepham
Posts: 4
Joined: Mon Dec 10, 2018 11:14 am
Vehicle: Ford Everest

Re: Cannot find BCM configuration on Ford Everest 2.0L Titanium 2018MY

Post by deepham »

tienbamboo wrote:
Sat Oct 13, 2018 2:56 pm
Hi everyone,

I have a problem with Ford Everest 2.0L Titanium 2018MY when I read data with Forscan (v2.3.17)
I don't see BCM module in configuration menu (I tested with 3 same model cars)!
and Forscan cannot "run service procedure" with PCM module too (It's always interrupted)

I checked as-built data on www.motorcraftservice.com/AsBuilt for VIN: MNCAXXMAWAJU56427 but I still see BCM data (Lines 726-xx-xx)
So Forscan cannot read BCM module on new Everest model yet, can it?

Please help me, thanks!
Use Forscan 2.3.19 version (BCM (BdyCM))
djmsarz
Posts: 5
Joined: Thu Nov 01, 2018 6:46 am
Vehicle: Ford Everest SUV, deisel 200 horsepower, 2018

Re: Cannot find BCM configuration on Ford Everest 2.0L Titanium 2018MY

Post by djmsarz »

Did you use ELM 327? Instead you better use ELS 27 obd it can detect your BCM
Post Reply