Ford Transit Custom 2018 codes

Car configuration discussions and experience sharing
Post Reply
oliola
Posts: 2
Joined: Sat Aug 11, 2018 6:48 am
Vehicle: Ford Transit Custom 2018
Location: France

Ford Transit Custom 2018 codes

Post by oliola » Sat Aug 11, 2018 11:06 am

Hello everyone
I just bought my first FORD and I'm very happy.
I would like to change some codes
- disable start & stop
- reduce powerpoint feeding time
- Stop the door opening sound.
Can you tell me if there is a file with the codes, do you have a link?
Or can you inform me?
Thank you very much for your help and congratulations for this forum

linux4ever
Posts: 2
Joined: Wed Apr 18, 2018 4:10 pm
Vehicle: Ford transit Custom

Re: Ford Transit Custom 2018 codes

Post by linux4ever » Thu Apr 04, 2019 9:42 am

I'm interested too. Nobody has a transit to share some codes??

gg1234635
Posts: 335
Joined: Sun Feb 24, 2019 9:04 pm
Vehicle: mondeo, 2.0 180, 2016

Re: Ford Transit Custom 2018 codes

Post by gg1234635 » Thu Apr 04, 2019 11:21 am

most codes are the same across all fords. Have a look on g2fusions.net or the forscan Guide facebook page (files) and you will find link to documents with the coding in them.
All that you are asking can be done.
Just make sure you make a backup before you make any changes and make sure you do lots of checking and reading up first.

big_si
Posts: 6
Joined: Sun Feb 24, 2019 8:15 pm
Vehicle: custom, diesel, 2.0/130 2019

Re: Ford Transit Custom 2018 codes

Post by big_si » Thu Apr 04, 2019 6:45 pm

Stop start cancel
bdyCM module config (as built format) 726-48-02 0100 xxxx xxxx to 0000 xxxx xxxx
it works on my 68 plate custom

linux4ever
Posts: 2
Joined: Wed Apr 18, 2018 4:10 pm
Vehicle: Ford transit Custom

Re: Ford Transit Custom 2018 codes

Post by linux4ever » Fri Apr 05, 2019 6:55 pm

Thanks for the answers.
I have already made backups of all the modules.
Anyone know how to activate the alarm and how to put the buttons of the heated seats on the screen?.

Post Reply