Page 1 of 1

2017 FORD Expedition Trailer Brake Controller Activation

Posted: Sat Aug 04, 2018 3:10 am
by greengecko
Vehicle Specification.jpg
Screen capture of Selection when FORScan is loading
Vehicle Specification.jpg (28.99 KiB) Viewed 1109 times
Hello need some help if you can assist or point me in the right direction. I have a 2017 FORD Expedition. When I load FORSCan and I select 2017 MY it starts to load the modules correctly but the entire program crashes and shuts down when it gets near the end of detecting the Modules. When I select 2015 or 2016 it completes detecting all the modules and finishes and the program loads correctly. I have installed the Dealer OEM Trailer Brake Controller in the Dash and everything is working with the lights and it detects when I Connect and Disconnect the Trailer but it does not activate the Electronic Brakes on the Trailer and does not allow me to adjust the Gain setting. I am not seeing the settings in the IPC Module as expected to be able to Enable the Trailer Brake Controller and Gain Settings

Re: 2017 FORD Expedition Trailer Brake Controller Activation

Posted: Fri Aug 10, 2018 2:14 am
by Mombo
FORScan crashes at this point for me too. I didn't think to try an older model.

Re: 2017 FORD Expedition Trailer Brake Controller Activation

Posted: Sat Sep 15, 2018 2:20 am
by roylarive
I loaded Forscan version 2.3.15 and chose sync 2 and it loaded fine. Version 2.3.16 kept crashing. However my trailer brake controller is not showing up in the IPC module. If you find the answer for my issue please let me know.

Re: 2017 FORD Expedition Trailer Brake Controller Activation

Posted: Mon Mar 18, 2019 7:58 pm
by jchoward1@gmail.com
I am having this issue on my 2017 expedition as well. Did you guys find a fix or get your stock break controller working?