Enable Auto lock on Ford Fiesta MK8

Car configuration discussions and experience sharing
Dragunov
Posts: 100
Joined: Thu Aug 25, 2016 8:55 am
Vehicle: Ford Mondeo MK5 Titanium 2.0TDCi 150HP

Re: Enable Auto lock on Ford Fiesta MK8

Post by Dragunov » Mon Jul 02, 2018 12:13 pm

The new Fiesta works as the new Mondeo, only Direct Config, so u need to change the bits in every module needed to do the job.

I guess the new Focus is gonna work the same, so no longer Central Config

davetcollection
Posts: 27
Joined: Sun Mar 19, 2017 4:00 pm
Vehicle: Focus '17 ST-Line 1.0 Auto, Focus 4 1.5D Titanium

Re: Enable Auto lock on Ford Fiesta MK8

Post by davetcollection » Mon Sep 10, 2018 11:33 am

Has anybody cracked these codes yet?

tudoracheelvis
Posts: 2
Joined: Fri Aug 24, 2018 3:37 pm
Vehicle: Kuga 2.0 2008

Re: Enable Auto lock on Ford Fiesta MK8

Post by tudoracheelvis » Wed Sep 26, 2018 12:52 pm

try 720-01-01 0C4B 3464 2038 autolock at 20km/h

tudoracheelvis
Posts: 2
Joined: Fri Aug 24, 2018 3:37 pm
Vehicle: Kuga 2.0 2008

Re: Enable Auto lock on Ford Fiesta MK8

Post by tudoracheelvis » Wed Sep 26, 2018 12:53 pm

I forgot...on IPC not BCM

J_marcolino
Posts: 18
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Mon Oct 15, 2018 1:21 am

Hello, Just viewed this today.
Have you tried this on a fiesta mk8?
Thanks

J_marcolino
Posts: 18
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Thu Oct 18, 2018 3:42 pm

HEllo!
Just tried today to make that change in IPC, but it gives an error at 12% writing.. I have the latest version of the Forscan.

Ps. I leave in here some photos of the original APIM before change to ST splash screen and IPC original values and APIM final values. 

SYNC3 - SPLASH SCREEN LOGO- 7D0-02-01 = ****-*X**-**** where X is usually 0. Changing to B='ST Performance' logo. (Thanks to Smartd00d on Forsowners club)

thanks

João
Attachments
alterado APIM para ST LOGO (Large).jpg
alterado APIM para ST LOGO (Large).jpg (71.06 KiB) Viewed 2513 times
IPC original (3) (Large).jpg
IPC original (3) (Large).jpg (78.19 KiB) Viewed 2513 times
IPC original (2) (Large).jpg
IPC original (2) (Large).jpg (79.21 KiB) Viewed 2513 times
IPC original (1) (Large).jpg
IPC original (1) (Large).jpg (80.71 KiB) Viewed 2513 times
IPC original (4) (Large).jpg
IPC original (4) (Large).jpg (82.48 KiB) Viewed 2513 times
APIM original (Large).jpg
APIM original (Large).jpg (86.26 KiB) Viewed 2513 times

Dragunov
Posts: 100
Joined: Thu Aug 25, 2016 8:55 am
Vehicle: Ford Mondeo MK5 Titanium 2.0TDCi 150HP

Re: Enable Auto lock on Ford Fiesta MK8

Post by Dragunov » Fri Oct 19, 2018 5:48 pm

On the Mondeo MK5, u only need to activate it in the IPC

J_marcolino
Posts: 18
Joined: Thu Jun 14, 2018 7:23 am
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by J_marcolino » Fri Oct 19, 2018 9:32 pm

Yes, but in the Mk8 always give some error.

davetcollection
Posts: 27
Joined: Sun Mar 19, 2017 4:00 pm
Vehicle: Focus '17 ST-Line 1.0 Auto, Focus 4 1.5D Titanium

Re: Enable Auto lock on Ford Fiesta MK8

Post by davetcollection » Mon Nov 05, 2018 1:36 pm

J_marcolino wrote:
Fri Oct 19, 2018 9:32 pm
Yes, but in the Mk8 always give some error.
Hi, Have you managed to enable autolock yet?

laaasse
Posts: 2
Joined: Sat Sep 10, 2016 3:11 pm
Vehicle: Fiesta mk8

Re: Enable Auto lock on Ford Fiesta MK8

Post by laaasse » Mon Nov 05, 2018 4:34 pm

Any ford dealer can do it 2 minutes of work :lol: :lol:

Post Reply