2008 Expedition - Disable TPMS?

Car configuration discussions and experience sharing
Post Reply
V8expo
Posts: 1
Joined: Sun Mar 12, 2017 11:55 pm
Vehicle: 2006 Ford Explorer 4.0 V6 XLT

2008 Expedition - Disable TPMS?

Post by V8expo » Fri Apr 06, 2018 11:41 pm

I absolutely hate the TPMS system. I’m getting an error about every third time I drive the vehicle, goes away as soon as it’s shut off and restarted, but it’s annoying, and I do plan on getting some aftermarket wheels soon which will not have sensors.

I religiously check my tire pressure, so I’m not worried about the system. I’d rrally like to disable it. Does anyone know how? What would I even look for? Is there a specific module and code to change?

I have a WiFi elm327 knockoff right now, without the HS/MS switch, but have a USB version with the switch on its way.

This is for a 2008 Ford Expedition Limited (not EL)

schmitt3235
Posts: 1
Joined: Sat Feb 10, 2018 1:49 am
Vehicle: 2010 Ford F150 FX2 5.4L full 4 door

Re: 2008 Expedition - Disable TPMS?

Post by schmitt3235 » Sat Apr 07, 2018 1:19 am

I bought a tpms bypass off of ebay. Only one company in Europe makes them. I put it in my 2010 F150 since I got rid of the sensors. It works. No more annoying light on dash. It's the only thing I have found unless someone could explain in the lines of code which part would shut it off. Good luck.

Lebult
Posts: 7
Joined: Thu Mar 01, 2018 11:42 pm
Vehicle: Explorer 4.6 V8, 2006

Re: 2008 Expedition - Disable TPMS?

Post by Lebult » Sat Apr 07, 2018 1:42 am

I was looking at one of those. They're about $100 on ebay.
Seems expensive for what is probably $20 worth of electronics, but I might have to do this. I'm not having luck with module hacking.

rixter99
Posts: 54
Joined: Mon Jan 15, 2018 4:04 am
Vehicle: 2008 F250 SD XLT 6.4L Diesel 2WD

Re: 2008 Expedition - Disable TPMS?

Post by rixter99 » Wed May 09, 2018 2:11 am

Try this:

726-02-01 **0* xxXX **** 0' = Disable TPMS. '6' = 'Enable' **6* xxXX ****- xx = Front; XX = Rear 60psi=3C; 65psi=47; 70psi=46;75psi=4B; 80psi=50...Must have TPMS type valve stems before enabling...

This is from my 08 F250 spreadsheet, but from OP work...

Cheers,

Rick
Cheers, Rick

Link to 2008-2010 F250 Spreadsheet
https://docs.google.com/spreadsheets/d/ ... sp=sharing

RileyRichards0n
Posts: 1
Joined: Fri Nov 03, 2017 9:09 pm
Vehicle: Ford F150 2016

Re: 2008 Expedition - Disable TPMS?

Post by RileyRichards0n » Fri Oct 25, 2019 7:45 pm

rixter99 wrote:
Wed May 09, 2018 2:11 am
Try this:

726-02-01 **0* xxXX **** 0' = Disable TPMS. '6' = 'Enable' **6* xxXX ****- xx = Front; XX = Rear 60psi=3C; 65psi=47; 70psi=46;75psi=4B; 80psi=50...Must have TPMS type valve stems before enabling...

This is from my 08 F250 spreadsheet, but from OP work...

Cheers,

Rick
This worked for my 2008 Ford Expedition! I had a 4 in the place of a 6. But if changed to 0 tpms will be disabled.

ThatOneDude
Posts: 162
Joined: Fri Jul 07, 2017 12:46 pm
Vehicle: 2012 Ford Expedition 5.4L 3V 4WD

Re: 2008 Expedition - Disable TPMS?

Post by ThatOneDude » Fri Nov 01, 2019 6:30 am

Nice! Thanks for confirming.
1996 Lincoln Town Car (For Sale)
2003 Ford Crown Victoria Police Interceptor (For Sale)
2007 Ford F-150 SuperCab 5.4L 3V 4WD
2011 Ford Crown Victoria Police Interceptor (For Sale)
2012 Ford Expedition 5.4L 3V 4WD

Post Reply