Region And Language for APIM and IPC

Car configuration discussions and experience sharing
ZwarteMustang15
Posts: 7
Joined: Mon Mar 01, 2021 6:26 pm
Vehicle: Mustang 5.0l 441 2015

Re: Regio en Taal voor APIM en IPC

Post by ZwarteMustang15 »

v8mustang wrote:
Tue Mar 02, 2021 9:06 pm
Hello

To change the language and region on a US mustang, you have to change the following

ACM 727-04-01 x3xx xx50 4Cxx
3 = Europe---- 504C = your country code PL the (x) you must left the original numbers

FCIM 7A7-01-01 x4xx xxxx xxxx
4 = europe

APIM 7D0-01-01 xxxx xxxA 3xxx
A = DAB on ------- 3 = RDS EU
APIM 7D0-02-01 504C xxxx xxxx

IPC 720-04-02 504C xxxx xxxx

Hope this Helps
Ik heb dit geprobeerd dan alleen met de mijn land code 4E4C maar krijg het niet voor mekaar.
Dus wat doe ik fout :)
Hier onder mijn orginele instellingen gaat om mustang S550 uit de US

Image
Image
Image
Image
ArturPapciak
Posts: 2
Joined: Wed May 12, 2021 12:42 pm
Vehicle: Focus, MY2011, 1,6, 125 km, 2011

Re: Region And Language for APIM and IPC

Post by ArturPapciak »

Hi,
Focus 2011 (11.25MY) from Spain.
I need to change language on SRM module (speech recognition module). At the moment a have Spanish but i need Polish.
Rest modules have Polish (board, radio). Should I modify IPC module?
Ken you help me guys, please?
Attachments
moduły.jpg
moduły.jpg (274.05 KiB) Viewed 531 times
Kulllach
Posts: 1
Joined: Sun Apr 25, 2021 9:43 am
Vehicle: Ford Escape 1.5 182hp AWD 2019

Re: Region And Language for APIM and IPC

Post by Kulllach »

In my 2019 Ford Escape I don't have IPC 720-04-02 504C xxxx xxxx option. Where can I change language in instrument cluster?
ZwarteMustang15
Posts: 7
Joined: Mon Mar 01, 2021 6:26 pm
Vehicle: Mustang 5.0l 441 2015

Re: Regio en Taal voor APIM en IPC

Post by ZwarteMustang15 »

Heeft je OBD reader wel een HS en MS schakelaar ?
Zie hieronder .

Image
Ghano38
Posts: 322
Joined: Sat Dec 07, 2019 9:10 am
Vehicle: Ford c max

Re: Region And Language for APIM and IPC

Post by Ghano38 »

ArturPapciak wrote:
Thu May 13, 2021 5:31 pm
Hi,
Focus 2011 (11.25MY) from Spain.
I need to change language on SRM module (speech recognition module). At the moment a have Spanish but i need Polish.
Rest modules have Polish (board, radio). Should I modify IPC module?
Ken you help me guys, please?
As i know earlier SR modules language choice is limited to 4 languages not sure your’s sports Polish at least the software version so you need to update it.
ArturPapciak
Posts: 2
Joined: Wed May 12, 2021 12:42 pm
Vehicle: Focus, MY2011, 1,6, 125 km, 2011

Re: Region And Language for APIM and IPC

Post by ArturPapciak »

Thx Ghano.

Could you tell me something more if you know (language codes, place of change) ? This upgrade can do by forscan, focccus or usdc?
racoguy
Posts: 3
Joined: Sat May 15, 2021 6:24 am
Vehicle: Ford mustang 2017

Re: Region And Language for APIM and IPC

Post by racoguy »

I managed to change the radio in my ex USA imported 2017 Mustang to Asia Pacific frequencies but reading this thread is there a region change to be done also? I take it from the first page New Zealand would be 4E5A?

Where in which module is this change needed?
Ghano38
Posts: 322
Joined: Sat Dec 07, 2019 9:10 am
Vehicle: Ford c max

Re: Region And Language for APIM and IPC

Post by Ghano38 »

ArturPapciak wrote:
Fri May 14, 2021 9:39 am
Thx Ghano.

Could you tell me something more if you know (language codes, place of change) ? This upgrade can do by forscan, focccus or usdc?
You can use both,since the adapter is the same and your car is a Focus mk3 but Forscan is much more recommended for APIM main configuration.
josevicenterios
Posts: 4
Joined: Wed Apr 28, 2021 1:19 pm
Vehicle: Explorer ST, 3.0/400, 2021

Re: Region And Language for APIM and IPC

Post by josevicenterios »

please see below thanks
Last edited by josevicenterios on Tue May 25, 2021 4:14 pm, edited 1 time in total.
josevicenterios
Posts: 4
Joined: Wed Apr 28, 2021 1:19 pm
Vehicle: Explorer ST, 3.0/400, 2021

Re: Region And Language for APIM and IPC

Post by josevicenterios »

Good Morning:

I have an US Mustang, and want to change to Venezuela. I have the Venezuela code (5645), but i do not have the ACM change and FCIM change in order to change the region and install the ANZmaps.

Any help is very appreciated.

Thanks.
v8mustang wrote:
Tue Mar 02, 2021 9:06 pm
Hello

To change the language and region on a US mustang, you have to change the following

ACM 727-04-01 x3xx xx50 4Cxx
3 = Europe---- 504C = your country code PL the (x) you must left the original numbers

FCIM 7A7-01-01 x4xx xxxx xxxx
4 = europe

APIM 7D0-01-01 xxxx xxxA 3xxx
A = DAB on ------- 3 = RDS EU
APIM 7D0-02-01 504C xxxx xxxx

IPC 720-04-02 504C xxxx xxxx

Hope this Helps
Post Reply