2010-2013 Mazda 3 Cruise Control Activation

Car configuration discussions and experience sharing
Onh5bu
Posts: 6
Joined: Sat May 25, 2019 11:53 am
Vehicle: Mazda 3 1.6 benzinli 2010 105 hp

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by Onh5bu » Sun Jun 02, 2019 4:08 pm


VictoriaSouth
Posts: 4
Joined: Wed Jun 26, 2019 9:52 am
Vehicle: Mazda3 BL 2010 1.6

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by VictoriaSouth » Wed Jun 26, 2019 12:02 pm

I set up a cruise remotely, cost $ 14. I am sending detailed instructions.
Without departure to the dealer. ;)

VictoriaSouth@yandex.ru

mitchy_bobby
Posts: 4
Joined: Tue May 28, 2019 11:13 am
Vehicle: Mazda 2 2011

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by mitchy_bobby » Wed Jul 03, 2019 1:45 am

Hi Onh5bu,

I am not an expert, You make these changes at your own risk, Make sure you have a back up of the original lines.

I think the changes are

The last four digits of 7E0-01-07 are F11E > Should become > F320
The last four digits of 7E0-01-25 are E6EF > Should become > E4ED

If this works please let us know.

VictoriaSouth
Posts: 4
Joined: Wed Jun 26, 2019 9:52 am
Vehicle: Mazda3 BL 2010 1.6

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by VictoriaSouth » Wed Jul 03, 2019 8:32 am

I'll make a cruise, 14$. (900 руб.) Гарантия 100%.

Write VictoriaSouth@yandex.ru

mitchy_bobby, line7 F320 & line25 E4ED = Error PCM. Checksum is not correct.

baxevan
Posts: 22
Joined: Fri Oct 13, 2017 9:03 am
Vehicle: MAZDA2 2008

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by baxevan » Mon Jul 08, 2019 1:35 am

VictoriaSouth wrote:
Wed Jul 03, 2019 8:32 am
I'll make a cruise, 14$. (900 руб.) Гарантия 100%.

Write VictoriaSouth@yandex.ru

mitchy_bobby, line7 F320 & line25 E4ED = Error PCM. Checksum is not correct.
The lines are correct. Quit trying to take advantage of people.

VictoriaSouth
Posts: 4
Joined: Wed Jun 26, 2019 9:52 am
Vehicle: Mazda3 BL 2010 1.6

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by VictoriaSouth » Mon Jul 15, 2019 8:41 am

baxevan wrote:
Mon Jul 08, 2019 1:35 am
VictoriaSouth wrote:
Wed Jul 03, 2019 8:32 am
I'll make a cruise, 14$. (900 руб.) Гарантия 100%.

Write VictoriaSouth@yandex.ru

mitchy_bobby, line7 F320 & line25 E4ED = Error PCM. Checksum is not correct.
The lines are correct. Quit trying to take advantage of people.

Rave!

Brum
Posts: 1
Joined: Tue Aug 20, 2019 6:10 pm
Vehicle: Mazda 2 + BMW E46 318i

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by Brum » Wed Aug 21, 2019 8:11 pm

Just came here to activate the cruise control on our ‘08 Mazda 2 (1.3.)
Bought a second hand steering wheel with all the buttons, the 4 pin brake switch and a OBD2 connector for car to laptop (USB.)
I followed the instructions as given in this forum and got it working!
Must say it took me a while before I understood what to do with line 25 in the PCM, but I got it; just extract 2 from the second and last digits from the last group of numbers and letters.
e.g. FGF8 becomes FEF6.
As the order is; a-b-c-d-E-f-G-h and 1-2-3-4-5-6-7-8

I still don’t know what happens if you start with for example FAF1, but I was lucky that mine was easy.

Post Reply