Important notes about As Built configuration and programming

Car configuration discussions and experience sharing
bwrench
Posts: 1
Joined: Mon Sep 07, 2020 12:31 am
Vehicle: 2006 Mercury Mountaineer, 4.6

Re: Important notes about As Built configuration and program

Post by bwrench »

se9303 wrote:
Wed Mar 07, 2018 5:35 am
Hi

Anyone have the “As built” data sheet for a 2006 Ford Explorer 4.0 L? I need to turn off the “park aid” function which my truck does not have but after my PCM/instrument cluster was changed/programmed by a shop Forscan has revealed DTC’s related to lost communication with parking assist control module

Update:

I managed to obtain through Ford the module build data (As-built) using the vehicle’s VIN and through ForScan i have access to the As-built data of each module. Looking through the IC module data there are numerous differences in each of the codes

Considering that my stock PCM was replaced with a used unit, would it be safe to edit all modules and enter rhe data as per the As-built data sheet Ford has provided?

I have coded/flashed BMW DME’s but not a Ford PCM and would appreciate any input to know if its safe to do or if anyone can pinpoint what exactly needs to be edited for the disabling of the park aid function

Upon request i can make the As-built information

Regards,
Mark
[When using Ford as built data on a PCM, that will program the PCM with the vehicle configuration that was used on that vehicle when it left the factory.]
originalwizards
Posts: 1
Joined: Sat Sep 05, 2020 12:22 pm
Vehicle: Various Ford Fiestas Diesel

Re: Important notes about As Built configuration and programming

Post by originalwizards »

Hi,
I believe it only shows the injector coding, if the engine requires it, I recently done an injector on the 1.4tdci fiesta 2007 and injectors on this model donor need coding.
Post Reply