Car configuration discussions and experience sharing
Posts: 2
Joined: Sun Sep 13, 2020 2:49 am
Vehicle: Ranger 3.2WT/200hp,2016


Post by Kolony648 » Mon Sep 14, 2020 3:34 am

niborc43 wrote:
Sat Aug 05, 2017 9:20 am
hi, when you carried this out were the temp zones in reverse?
Ive just done this same upgrade and the temp zones are the wrong way round.
Just wondering if yours was the same.
Your are fixed this problem or not please tell me for solution

Posts: 2
Joined: Wed Apr 03, 2019 2:16 pm
Vehicle: Ford Fiesta 1.0 Ecoboost 140 ST Line


Post by Antiwomaagnot » Thu Sep 17, 2020 2:59 pm

CoD21 wrote:
Thu Aug 27, 2020 8:39 am
Salva wrote:
Mon May 11, 2020 5:08 pm
I did this on my Fiesta Vignale 2019.
7D0-04-01 xxxx xxx0 xxxx (2 before modification)
7D0-01-02 xxxx x0xx xxxx (4 before modification)
That works perfect, i have surround option and nav on ipc/small screen distance and directions are goods.
do you have the buttons on sync screen? i did that but buttons dont show up
When changing these values , a master reset is required for changes to take effect

here all the documentation for the apim

Posts: 7
Joined: Fri Oct 06, 2017 7:18 pm
Vehicle: Mondeo Mk4 1.8 TDCI


Post by tommcgov1 » Sat Oct 03, 2020 3:32 pm

Hello 12VoltWill, can you tell me the wiring that needs to be changed, Focus UK model with factory sync 3 and dual auto aircon.
Have enabled it on the sync3 screen but as most people report the driver becomes the passenger on the sync touch screen.
Any help gratefully received.

quote=12voltWILL post_id=17112 time=1505953145 user_id=51781]
I've done quite a few of these upgrades from Sync2/MFT to Sync3 and when the climate controls are backwards it's actualluy in the wiring.. There are 3 wires that need to be moved from one of the bezel harnesses to the other. I will try to post the solution tomorrow.

Post Reply