C-MAX settings success!

Car configuration discussions and experience sharing
Post Reply
jzchen
Posts: 30
Joined: Thu May 25, 2017 5:41 pm
Vehicle: C-MAX Energi, 2.0L I-4, Atkinson/188 hp net, 2013

C-MAX settings success!

Post by jzchen » Sun May 28, 2017 8:31 pm

DRL activation: There were 3 settings under BdyCM (Main). Original setting was something like "Dipped except in p", which there is no DRL. Set to "Standard dipped..." turned them on.

Tire size calibration: Saw the tire size setting and took a peek. Nice Ford has provided quite a few available tire sizes, even different ones for speed rating, H or W, for the standard 225-50/17 tire. Strange but the original tires are V speed rated....

zhoujun
Posts: 2
Joined: Fri Dec 22, 2017 12:09 pm
Vehicle: C-MAX energi 2016

Re: C-MAX settings success!

Post by zhoujun » Wed Feb 28, 2018 3:33 am

Can I know which lamp will be DRL when you enable it ?

livesmith
Posts: 1
Joined: Tue Sep 25, 2018 5:11 pm
Vehicle: 2013 Ford C-Max Energi

Re: C-MAX settings success!

Post by livesmith » Thu Sep 27, 2018 5:42 pm

If it's the same as my 2013( which had DRL from the factory) it uses the low beam lights for DRL.

Post Reply